Dynex DX-CRDRD Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dynex DX-CRDRD. Dynex DX-CRDRD 20 pagina's. Lecteur de cartes interne tout-en-un
Ook voor Dynex DX-CRDRD: Handmatig (6 pagina's), Handleiding voor snelle installatie (2 pagina's), (Engels) Gebruikershandleiding (20 pagina's), (Snelle installatiegids (2 pagina's), (Frans) Gebruiksaanwijzing (20 pagina's), (Frans) Installatiehandleiding Rapide (2 pagina's)

Package contents

• Card reader with USB 5-pin cable

• Mounting screws (ISO 3f 4mm) (4)

• Extra front bezel (1)

• Utility CD (includes AP drivers and this User Guide)

• Quick Setup Guide

Minimum system requirements

• IBM-compatible PC

• Pentium 133 MHz or higher processor

• CD drive

• 2 MB of hard drive space

• One available on-board 5-pin USB connector on the computer's system board

• One available 3.5-inch drive bay

• Windows® 2000, Windows® XP, Windows® Vista, or Windows® 7

Installing the card reader

Caution: Electrostatic discharge (static electricity) can damage electronic components. Make

To install your card reader:

1 Turn off your computer and disconnect the power cord.

2 Open your computer's cover. For more information, see the documentation that came

with your computer.

sure that you are grounded before you install your card reader. Turn off your computer,

then touch a bare metal part of your computer, such as the back of the chassis or power

supply, to discharge any static electricity.

DX-CRDRD