AGS Merlin 1000Si Installatie- en bedieningshandleiding - Pagina 4

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} AGS Merlin 1000Si. AGS Merlin 1000Si 16 pagina's. Gas safety products, gas utility controller
Ook voor AGS Merlin 1000Si: Gebruikers- en installatiehandleiding (7 pagina's), Gebruikers- en installatiehandleiding (9 pagina's), Gebruikershandleiding (12 pagina's)

Installation & Operation Manual

Typical Installation Arrangement

1. POWER / LINE IN

110-120V AC Power should be supplied to the [POWER / LINE IN] terminal and fused at 3A.

On connecting the mains supply to the panel the power LED indicator will light up – this is

located on the front cover (American Gas Safety Logo).

2. GAS SOLENOID VALVE OUTPUT

100-120V AC electrical power supplied from the [VALVE OUT] connector using a 3 core cable

can be connected to a gas solenoid valve which can shut the gas supply on alarm status.

Refer to your valve manual for more information and wiring!

1000Si IOM Rev: 06

01-20

Merlin 1000Si