Adesso Newton 5172-21 Montage-instructie

Blader online of download pdf Montage-instructie voor {categorie_naam} Adesso Newton 5172-21. Adesso Newton 5172-21 2 pagina's. Led torchiere

NOTE: TOUCH DIMMER

SWITCH IS LOCATED

UNDER SHADE

Assembly Instructions (English)

ASSEMBLY INSTRUCTION FOR

Newton LED Torchiere

Model# 5172-21

1. Place socket holder (H) onto tubes (A) and screw

until tight.

2. Screw tubes (A),(B),(C) and (D) together until

tight.

3. This step is easier when you are sitting in a

chair or on the floor, with the base flat on the

ground.

Insert tubes (D) to base (E), then tighten each tube

with screw (F) by using wrench (G). You may need

to pull any excess cord gently through the poles so

that these two parts fit.

4. Place the glass shade (I) onto shade holder (H).

Then, turn each of the 3 plastic pieces connected

to shade holder (H) so that they latch onto shade (I)

and secure it (Detail view ).

5 . Connect the adaptor (K) with cord (J).

GENERAL PRODUCT INFORMATION:

This product is suitable

for dry locations only.

---------------------------------------------------------------

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug as a feature to

reduce the risk of electric shock (one blade is larger

than the other). This plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit, contact a

qualified electrician.Do not use with an extension cord

unless the plug can be fully inserted.

ALTER THE PLUG .

PARTS DIAGRAM

(5)* Hex screw (F)

21 Penn Plaza Suite 909 New York,NY 10001

Tel: (212) 736 4440 Fax: (212) 736 4806

5172-21

2.0

DO NOT

(1)* Allen wrench(G)