Adesso 5420-20 Montage-instructie

Blader online of download pdf Montage-instructie voor {categorie_naam} Adesso 5420-20. Adesso 5420-20 2 pagina's. Arc lamp

Assembly Instructions (English)

ASSEMBLY INSTRUCTION FOR

Willa Arc Lamp

Model# 5420-20/ 22

GENERAL PRODUCT INFORMATION:

This product is suitable for dry locations only.

---------------------------------------------------------------

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug as a feature to reduce the risk of electric shock (one blade

is larger than the other). This plug will fit in a polarized outlet only one way. If the plug does not

fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.Do not

use with an extension cord unless the plug can be fully inserted. DO NOT ALTER THE PLUG .

----------------------------------------------

BULB TYPE: Use only with maximum of 1*100 Watt incandescent bulb (bulb not included).

(4)* HEX screw (H)

1. Screw tube (G) into (J) until tight.

2. Insert socket holder (F) into tube(G), then tighten it using 2 *hex screws (H) with allen

wrench(I).

3. Screw tube (B) clockwise onto base (A) until tight , then screw tube (B), (C), (D) and (E)

together .You may need to pull any excess cord gently through the poles so that these two parts

fit.

4. Insert tube (J) to (E), then tighten it using 2*hex screws (H) with allen wrench(I).

Note: The Arc lamp should face forward in the same direction as the switch, and cord

coming out of the back of the base.

5. Place shade (K) onto socket holder (F) and turn the socket ring (L) until tight to secure shade.

PARTS DIAGRAM:

(1)* Allen Wrench (I)

5420-20/22

(1)* Socket ring(L)

21 Penn Plaza Suite 909 New York,NY 10001

Tel: (212) 736 4440 Fax: (212) 736 4806

www.adessohome.com

1.0