Galvin Specialised Ezy-Drink TD90P Product Installatie Manuallijn - Pagina 2

Blader online of download pdf Product Installatie Manuallijn voor {categorie_naam} Galvin Specialised Ezy-Drink TD90P. Galvin Specialised Ezy-Drink TD90P 4 pagina's. Push button bubbler tapware

Pagina afdrukken

PRE-INSTALLATION - MOUNTING DETAILS

−

TD90C - If the mounting holes do not already exist, mark out

and drill the holes in the wall/sheet, as shown in rough-in dimensions.

Note: Before installation, all lines must be flushed. We recommend that a line

strainer be installed prior to drinking taps to eliminate any foreign material

120

70°

ASSEMBLY

1/2" BSP

(SIDE VIEW AS

INSTALLED)

TD45P

INSTALLATION

IMPORTANT: Galvin Specialised products must be installed in accordance with these installation instructions

and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical

supply conditions must also comply to the applicable national and/or state standards. Failing to comply with

these provisions shall void the product warranty and may affect the performance of the product.

1. Fit tap assembly

− The drinking taps are fitted with flow

restrictors.

−

When applying thread tape or sealant to the

inlet, ensure the opening is not obscured.

Failure to do so may restrict or block the flow

restrictor, affecting the flow of water.

120

1/2" BSP

ASSEMBLY

(SIDE VIEW AS INSTALLED)

TD90P-2

2. Secure the body

Version 2, 8 June 2017, Page 2 of 4

135 NOM

1/2" BSP

− Secure the body with supplied screws.

−

Ensure outlet is 15° angled.

50.5

TO SUIT

SCREWS

USED

15°

ASSEMBLY

(AS SEEN BY USER)

TD90P