Dynisco PT150 Bedieningshandleiding - Pagina 2

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Dynisco PT150. Dynisco PT150 3 pagina's. Hydraulic sensor

Pagina afdrukken

From lab to production,

providing a window into the process

The PT100 Series Industrial Transducer is used to

OPERATING PRINCIPLE

make pressure measurements for hydraulic

applications and corrosive media up to 10,000 psi.

These models incorporate a four-arm, 350-ohm bonded

foil Wheatstone bridge strain gage. An amplifier can be

added to this proven technology to provide a high-level

output signal (e.g. 0 – 5 V dc or 0 – 10Vdc) proportional

to the pressure (within the specified error band).

Internal – All 100 Series transducers contain an

SHUNT CALIBRATION

internal Shunt Calibration resistor, R-CAL, which

provides a simulated output of 80% of full scale when

pins E and F are shorted.

External – The model PT130 also provides an output of

80% of full scale when a 34,935-ohm Shunt Calibration

resistor is placed across pins B and D. External R-CAL

feature is not available on models PT160 and PT150.

NOTE: The internal and external R-CAL should not be

used at the same time because incorrect readings will

result.

The pressure fitting on all 100 Series transducers

PRESSURE FITTING

contains a 1/8"-27 NPT internal pressure port. The

fitting is fabricated from high-strength stainless steel.

All models are equipped with a six pin, Bendix PT02A-

ELECTRICAL CONNECTORS

10-6P receptacle. The customer supplied mating plug is

a socket, Bendix PT06A-10-6S, or equivalent.

ELECTRICAL CHARACTERISITCS

Model

Wiring

Signal

PT130

4 wire

3 mV/V

PT150

4 wire

0-5 V dc

3 wire

1-6 V dc

PT160

4 wire

0-5 V dc

3 wire

1-6 V dc

Excitations

10 V dc Recommended,

15 V dc Max.

12-32 V dc ± 12 to ± 16 V dc

12-32 V dc

16-32 V dc, ± 14 to ± 16 V dc

16-32 V dc

P/N: 974022

Rev: 100517

www.dynisco.com

WIRING CODES

Function

Signal +

Signal –

Excitation +

Excitation –

R-Cal Int.

R-Cal Ext.

WIRING COLOR CODE

Red

Black

White

Green

Blue/Orange

Questions concerning warranty, repair cost, delivery,

TRANSDUCER REPAIR

and requests for a RA# should be directed to the

Dynisco Repair Department, 508-541-9400 or email:

repair @dynisco.com. Please call for a return

authorization number (RA#) before returning any

product. Damaged transducers should be returned to:

Dynisco Instruments

Attn: RA #_____________

38 Forge Parkway

Franklin, MA 02038

Please call 800-221-2201 or 508-541-9400 or fax

TECHNICAL ASSISTANCE

508-541-9206.

This Dynisco product is warranted under terms and

WARRANTY

conditions set forth in the Dynisco Web Pages. Go to

www.dynisco.com

"Product Warranty" at the bottom of any page for

complete details.

ECO: 30965

-2-

PT130

PT150 and PT160

4 wire

3 wire

E, F

B, D

Signal (+)

Signal (-)

Excitation (+)

Excitation (-)

R-Cal

and click on "Instruments". Click