Hikmicro B Series Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hikmicro B Series. Hikmicro B Series 20 pagina's. Handheld
Pagina afdrukken
Note
● After enabling the macro mode, only the
emissivity can be modified. Parameters such
as distance, image mode, parallax correction,
and measurement range cannot be modified.
● After disabling this function, the parameters
will be restored to the previous set values, and
the meas. range will be set to auto switch.
9
Cast Screen
The device supports casting screen to PC by
UVC protocol-based client software or player.
You can connect the device to your PC via a
type-C cable, and cast the real-time live view
of the device to your PC through the UVC
alarm client.
Before You Start
● Connect the device and PC with supplied
Type-C cable.
● Download the UVC Alarm Client from
HIKMICRO official website, and install the
client on your PC. Refer to the user manual of
UVC Alarm Client for detailed operation.
Steps:
1
In the live view interface, press
show the menu.
2
Press
3
Press
4
Open the UVC Alarm Client on your PC,
and you can view the live view and
operation of the device.
10
Set Brand Logo
The brand logo is a manufacturer logo
displayed on the upper left corner of the
screen.
Steps:
1
In the live view interface, press
show the menu.
2
Press
3
Press
4
Press
Result
The brand logo is added on the live view
interface, captures, and videos.
11
Set LED Light
In the live view interface, press
to Flashlight to enable or disable the LED light.
/
to select Cast Screen.
to enable the function.
/
to select Brand Logo.
to enable the function.
to save and exit.
10
to
to
, and go