Corbel Geometries CH02B Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Corbel Geometries CH02B. Corbel Geometries CH02B 11 pagina's. Camera hub

Introduction

This Camera Hub is designed to provide a 3D Stereophotogrammetry scanning system with DC power supplies and

diode isolated camera trigger signals to DSLR cameras. One Camera Hub can serve up to 8 cameras with DC power

and trigger signals.

2.1

Inspect the product for any possible signs of external damage or loose or damaged components. If the module is

visibly damaged, please notify our service department or our local sales representative immediately.

A damaged camera hub should not be used within your system.

2.2

Installation

The Camera Hub should be securely fastened before plugging in any cables.

Please follow the steps below to install the Camera Hub on your system.

Step 1: Ground yourself to neutralize the static electricity that might be in your body.

Step 2: Make sure the power is OFF. Plug in camera power cables and camera trigger cables into the power ports

and trigger ports respectively.

Step 3: Plug the trigger link cable into the Trigger Link socket of your Camera Hub to link several Camera Hubs

together.

Step 4: Plug a trigger source (e.g. remote controller, or control box) into the other Trigger Link sockets of your

Camera Hub to provide the trigger signal.

Step 5: Plug the AC power cord into the power sockets both in the Camera Hub and the AC power source.

Page