Dynojet POWER VISION PV3-16-10 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dynojet POWER VISION PV3-16-10. Dynojet POWER VISION PV3-16-10 7 pagina's.

Pagina afdrukken

CHANGING THE SETTINGS

This menu allows you to rotate the screen allowing you to
change the orientation of the Power Vision device along with
adjusting the screen brightness. Turn the brightness up and
make your screen pop!
Select Device Tools>Settings>Rotate Screen to fl ip the
screen.
Select Device Tools>Settings>Brightness to change the
screen brightness.

UPDATING THE DEVICE

This menu allows you to update the device with the latest fi rmware.
1
Go to www.dynojet.com.
2
From the top navigation menu, select Support>Downloads.
3
Click Power Vision 3.
4
Click the Firmware drop-down and download the Power Vision 3
Firmware for Honda.
5
Save the fi le to your device.
6
Select Device Tools>Update Device.
DIAGNOSTIC ENABLE
This menu allows you to create a fi le containing device
diagnostic information used by Dynojet Tech Support.
1
From the Main Menu, select Device Tools>Diagnostic Enable.
This will turn on diagnostic logging. Logging will continue until
the device is restarted.
2
If requested by Dynojet Tech Support, connect your Power
Vision to a computer and email the diagnostic fi le to
[email protected]. Diagnostic log fi les are placed in the
log fi les directory.

USB MODE

This menu allows you to connect your Power Vision to your
computer and enables sending and receiving fi les.
1
Connect the Power Vision to your computer using the included
USB cable. The Power Vision will automatically enter USB Mode.
OR
From the Main Menu, select USB Mode.
2
Transfer the desired fi les to your computer or to the Power
Vision.
6 HONDA CRF INSTALLATION GUIDE
DEVICE TOOLS
SETTINGS
UPDATE DEVICE
DIAGNOSTIC ENABLE
MAIN MENU
USB MODE
DEVICE TOOLS
USB FILE TRANSFER ENABLED
HELP
USB MODE
PRESS
UPDATE DEVICE
PV3_5.16.8297.41698.dfu
TO EXIT
98200130