Dynojet POWER VISION PV3-2504C Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dynojet POWER VISION PV3-2504C. Dynojet POWER VISION PV3-2504C 8 pagina's.

Pagina afdrukken

INTRODUCTION

RETURN

SCROLL

ENTER

HOME/LOG

SCROLL

POWER VISION OVERVIEW—FRONT VIEW

USB CABLE PORT

CONNECT TO COMPUTER

POWER VISION OVERVIEW—SIDE VIEW

INSTALLING THE POWER VISION

INSTALL POWER VISION

2 CAN-AM TRAIL INSTALLATION GUIDE

DIAGNOSTIC CABLE PORT

CONNECT TO VEHICLE

DIAGNOSTIC PORT

Thank you for purchasing the Power Vision from Dynojet

Research. At Dynojet, our mission is to make every ride

the ultimate ride. The Power Vision allows you to tune

your stock ECU to achieve optimal performance from

your vehicle.

The Power Vision is the device to interface between

your computer and the vehicle ECU. Use the buttons

to navigate the device menus, make selections, cycle

through the four full-color available gauge screens, and

log data. Connect to the diagnostic port to flash a tune;

use the USB connection to interface between the Power

Vision and your computer.

Make your Power Vision device yours; display the

channels you want to see with four user-customizable

full-color gauge screens. Make the Power Vision your

window into your vehicle; secure the Power Vision to

your dashboard or handlebars to monitor any desired

set of gauges such as Throttle Position, Engine Speed,

and more. Wideband Air:Fuel Ratio and integrated belt

temperature can be added as channels to the PV3's

monitors by adding the accessories available at

www.dynojet.com.

For state of the art technical support, please visit

www.dynojet.zendesk.com.

Secure the Power Vision to the vehicle using the supplied

Velcro. Make sure the Power Vision will not interfere with

the operation and steering of the vehicle.

Visit

www.dynojet.com

for your Power Vision.

Note: The Power Vision does not need to be mounted

to the vehicle, however, the Power Vision provides

a window into your vehicle. Mount the Power Vision

to your dashboard and gain access to customizable

full-color gauge screens, along with data logging and

troubleshooting screens.

Attach the diagnostic cable to the diagnostic port on the

Power Vision and to the diagnostic port on the vehicle.

Trail Models: located under the dash to the left of the

steering column.

Affix the supplied CARB E.O. label to a conspicuous area

next to the original emissions label is a good location.

On many of these models this is on the downtube of the

frame. Make sure to clean the surface before attaching

for an array of mounting solutions

98200115