Dynojet Power Commander III USB EX Installatie-instructies - Pagina 3
Blader online of download pdf Installatie-instructies voor {categorie_naam} Dynojet Power Commander III USB EX. Dynojet Power Commander III USB EX 3 pagina's. 2000-2001 honda
Ook voor Dynojet Power Commander III USB EX: Installatie-instructies (4 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's), Installatie-instructies (3 pagina's)
Pagina afdrukkenconnector
i132-411EX
unplug TPS
connector
stock
PCIII USB EX
connectors
ground wire from
PCIII USB EX
9
Located the Throttle Position Sensor (TPS)
connector.
With the air box moved out of the way, you can
access the TPS.
10 Unplug the TPS connector from the right hand
side of the throttle body as shown in Figure D.
11 Attach the connector from the PCIII USB EX to
the stock TPS and wiring harness as shown in
Figure E.
12 Attach the ground wire from the PCIII USB EX
to the negative side of the battery as shown in
Figure F.
13 Reinstall the air box and fuel tank. Verify the
tank does not pinch the PCIII USB EX wiring
harness.
14 Replace the seats.
15 Insert the cd provided into your computer's
cd-rom drive.
16 Follow the on-screen instructions to install the
PCIII USB software.
Visit www.powercommander.com to download
software tutorials and the latest maps.
2008 Honda CBR1000RR - PCIII USB EX - 3