Hikmicro HMI-M30 Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Hikmicro HMI-M30. Hikmicro HMI-M30 8 pagina's. Pocket thermography camera

● Make sure the plug is properly connected to the power socket.

● DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by

overload.

Battery

● The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary.

● DO NOT charge other battery types with the supplied charger. Confirm there is no flammable material within

2 m of the charger during charging.

● For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality.

Otherwise, damage may occur.

● DO NOT place the battery near heating or fire source. Avoid direct sunlight.

● DO NOT swallow the battery to avoid chemical burns.

● DO NOT place the battery in the reach of children.

● The battery voltage is 3.85 V, and the battery capacity is 2100 mAh.

● The battery is certified by UL2054.

Maintenance

● If the product does not work properly, please contact your dealer or the nearest service center. We shall not

assume any responsibility for problems caused by unauthorized repair or maintenance.

● A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan

varies, so periodic checking is recommended. Contact your dealer for details.

● Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.

● If the equipment is used in a manner not specified by the manufacturer, the protection provided by the

device may be impaired.

● We recommend you send the device back for calibration once a year, and please contact the local dealer for

the information on maintenance points.

Using Environment

● DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp environments. Make

sure the running environment meets the requirement of the device. The operating temperature shall be

-10 °C to 50 °C (14 °F to 122 °F), and the operating humidity shall be 95% or less.

● This device can only be safely used in the region below 2000 meters above the sea level.

● Place the device in a dry and well-ventilated environment.

● DO NOT expose the device to high electromagnetic radiation or dusty environments.

● DO NOT aim the lens at the sun or any other bright light.

● When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it

may burn out.

● The device is suitable for indoor and outdoor uses, but do not expose it in wet conditions.

● The level of protection is IP 54.

● The pollution degree is 2.

Technical Support

● The https://www.hikmicrotech.com portal will help you as a HIKMICRO customer to get the most out of your

HIKMICRO products. The portal gives you access to our support team, software and documentation, service

contacts, etc.

Emergency

● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and

contact the service center.