Gama Garden GLM 40P Basic Gebruiksaanwijzing - Pagina 15
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gama Garden GLM 40P Basic. Gama Garden GLM 40P Basic 19 pagina's.
Acquaer Kft.
15/19
www.gamagarden.eu
H-4900, Fehérgyarmat, Szatmári utca 11.
GENERAL INFORMATION
1.Installing and removing a battery
• Switch off the engine and all power consumers
• This battery may only be used on the place provided by the manufacturer.
• Avoid short circuits by tools.
• Remove the foreign body from the surface of the battery and firmly clamp the
battery after inserting it.
• Before installation: Clean the poles and terminals and grease them.
• When installing: clamp the positive pole and ensure that the pole terminals are
firmly seated.
2.Storage and transport
In unfilled condition, the batteries should be stored cool and dry. Batteries are to be
subjected to a full charge (see Charge the battery) before storage (for example
during the winter break). New battery has about 80% charge capacity.
3.Maintenance
Sealed batteries require no maintenance in the form of water refill, so do not open
the batteries again. Keep the terminal poles and the battery surface clean (damp
cloth, antistatic). Tighten the clamps and grease them lightly. Check the charge level
of the battery by voltage control and recharge if necessary (see 4.Charge the
battery).
4. Charge the battery
Important! For sealed batteries such as yours, the charge is carried out using the
supplied battery charger as shown in Following pictures. Table 1 in the case of a non-
original charger requires monitoring of the charging voltage as well as a manual
override. Observe the instructions of the charger manufacturer!
IMPORTANT:
• If the characteristic of a charger manufacturer is not known, check voltage
monitoring with one voltmeter and perform manual switch-off at 14.4V.
• The rated current of the charger should be 1/10 of the nominal capacity in
amperes.
• When charging, first connect the battery to the charger, then switch on the
charger.