Dynojet Power Vision Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dynojet Power Vision. Dynojet Power Vision 8 pagina's. For 2019-2022 can-am ryker 600/900
Ook voor Dynojet Power Vision: Snelstarthandleiding (17 pagina's), Installatiehandleiding (6 pagina's), Installatiehandleiding (7 pagina's), Handmatig (7 pagina's), Installatiehandleiding (7 pagina's), Installatiehandleiding (7 pagina's), Installatiehandleiding (7 pagina's)

VIEWING THE VEHICLE INFORMATION

This menu allows you to view the device status (paired/not

paired), VIN #, Model ID, ECU serial number, tune compat, and

checksum compat.

Select Vehicle Tools>Vehicle Information.

VIEWING THE DIAGNOSTIC CODES

This menu allows you to read and clear diagnostic trouble

codes.

To read codes, select Vehicle Tools>Diagnostics>Active

Codes.

To clear codes, select Vehicle Tools>Diagnostics>Clear

Codes.

RESTORING THE ECU

This menu allows you to restore the ECU. Use Restore ECU if

the device does not complete the ﬂ ash or if your vehicle will

not start.

Select Vehicle Tools>Restore ECU.

RESET ADAPTIVES

This menu allows you to clear the trims which the narrowband

sensor has learned throughout prior drive cycles.

Select Vehicle Tools>Reset Adaptives.

RELEARN DCT

Use Relearn DCT when the MT/AT shift lights are illuminated

solid on the dash or if the vehicle's transmission needs service

or a module was replaced. The DCT relearned sequence does

not show up right away.

Verify the vehicle is up to operating temperature.

Select Vehicle Tools>Relearn DCT.

4 HONDA TALON

INSTALLATION GUIDE