Hikobike Pulse Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hikobike Pulse. Hikobike Pulse 16 pagina's.

QUICK START

- RIDING THE BIKE

Before riding the bike, check the battery capacity.

Press the button on top of the battery.

The 4 LEDs on the battery below the button show the

battery charge level.

Turn on the C600 display by pressing down the ON button on the handlebar keypad.

Select the level of assist from 1- 5. Default is 0 (no assist).

You can hold down the SET button for 3 seconds to select/change POWER, STANDARD or ECO riding

mode. Hold down SET to return.

Start pedalling or use the hand throttle to start the motor

Select the appropriate gear

Pulling on either front or rear brake level will stop the motor immediately

For optimum battery life, try to avoid riding the ebike until the battery is completely flat. Turn off

the Power Assist as soon as you notice the battery has lost power and pedal the bike home, and

charge the battery as soon as possible.