Corby qq 2032 v Gebruiks- en onderhoudshandleiding - Pagina 7
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Corby qq 2032 v. Corby qq 2032 v 8 pagina's.
Pagina afdrukkenOPERATING THE SAFE
LED definitions
INPUT: Will flash each time a button is pressed
LOBATT: Indicates batteries are running out
OPEN: Indicates code has been accepted
It is recommended that both the primary code and master code are changed for
security reasons.
The reset button is located on the inside of the Safe door (see INITIAL SETUP). Pressing
this button will allow the codes to be changed and reset.
CHANGING THE CODES
Follow the processes below to change the primary code and master code values.
Changing the
primary code
Changing the
master code
BACKUP POWER SUPPLY
If the batteries in the Safe run out, use the backup
power supply (supplied).
Simply plug it into the front of your Safe; this will allow
you to enter your code as normal.
Alternatively the override keys can be used to gain
entry into the Safe if the power for the batteries has
run out.
Open safe with
override key
Open safe with
Wait for "Open"
override key or
Light to go off
primary code
Code definitions
Primary Code (Default - 1, 2, 3, 4, #
Master Code (Default - 1, 2, 3, 4, 5, 6, 7, 8, #
"Reset"
4 digits of your
Button
choice e.g. 1, 2, 3, 4
Press "0" button,
"0" button,
"Reset" button
"#"
Button
8 digits of your
choice e.g.
1, 2, 3, 4, 5, 6, 7, 8
"#"
Button
0 7