gama.professional IQ 2 PERFETTO Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} gama.professional IQ 2 PERFETTO. gama.professional IQ 2 PERFETTO 15 pagina's.
Pagina afdrukken
EN
Thank you for having purchased this GAMA by GAMA.PROFESSIONAL product. We are sure that
you will appreciate all the care that has gone into its design and manufacture. GAMA by
GAMA.PROFESSIONAL research constantly combines innovation and technology to offer
premium-quality products. Excellent performance is guaranteed since we apply the most
advanced methods and use the best materials. This guarantees excellent performance, designed
for the most demanding clients who wish to achieve excellent results both in the salon and at
home. Please read these instructions carefully before use, and keep them for future reference.
WARNING:
READ CAREFULLY BEFORE USING THE APPLIANCE.
SAVE THESE INSTRUCTIONS.
1. Make sure the voltage of the power supply matches the
voltage of the device. Any error in the connection may cause
irreparable damage and will not be covered by the warranty.
2. Unplug the appliance from the power outlet when it is off
because proximity to water could pose a threat; be extra
7. To clean the appliance, always disconnect it from the
power outlet first and let it cool completely. When cleaning,
do not use aggressive products containing phenylphenol. 8.
Make sure air inlets and outlets are not clogged. 9. Pick the
hair dryer up by the handle to use it. 10. Do not hold or
handle the appliance by the electric cord. Do not wind the
electric cord around the appliance, bend it or twist it so as
not to impair its correct functioning and thus damage the hair
dryer. Lack of compliance with the above warnings and
instructions could cause a short circuit and thus irreparable
damage to the hair dryer, as well as put the user's safety at
risk. 11. Do not use extension cords. 12. Do not clean your
hair dryer with aggressive products. 13. Do not use the hair
dryer at temperatures below 0°C or above 35°C. 14. This
appliance must not be used by people with reduced
physical, motor or mental capacity (including children), or
This appliance has been designed with a
double-insulation system for your safety.
The symbol on the product or on the package
indicates that the product should not be considered
as normal domestic waste; once you have decided to
dispose of it, it should be taken to the proper
collection point for recycling electrical and electronic
appliances. When you dispose of this product correctly, you
help prevent potential negative consequences for the
environment and health, which could derive from improper
treatment of the product. For more detailed information on
recycling this product, contact the municipal office, the
local waste disposal service or the shop where it was
purchased.
INSTRUCTIONS FOR USE
1 - Make sure your hands are completely dry and the switch is
in the off position: O / OFF before connecting the appliance to
the power supply.
By plugging it in, all the lights will flash as a welcome message.
2 - To turn it on, move the on/off switch from 0 to I. (Fig.1)
3 - Regulating the airflow and desired temperature. When first
switched on, the hair dryer is set with both air flow and
temperature set at the minimum, corresponding to the first
indicator light from the bottom, next to the side buttons. (Fig.2)
COOL SHOT
You can use the "Cool shot" button during hair drying to promote a
long-lasting style.
To activate this function, simply press and hold the Cool Shot button.
To deactivate it, release the button. (Fig.5)
LOCK BUTTON
After setting the desired air flow speed and temperature, the selector buttons
can be locked to prevent accidental change during use. To lock the air speed
and temperature selection buttons, move the on-off switch to the locked
position
. (Fig.6)
While the air speed and temperature selector buttons are locked, the Cool
Shot button/function can still be used.
TURBO FUNCTION
The hair dryer is equipped with the TURBO function, which boosts
the airflow by bringing the motor to a maximum speed of 120,000
rpm in 30 seconds. To activate the function, set the maximum
speed and press and hold the TURBO button for a few seconds.
The turbo function is activated when the LED turns green. At the
end of the activation time, the LED will return to its original color. If
you wish to activate it again, repeat the procedure. (Fig.7)
If the hairdryer is locked, it is not possible to activate the function.
AUTO CLEANING FUNCTION
This self-cleaning process should be performed after each use of the
hair dryer.
1) First, remove any accessories connected to your hair dryer (such as
nozzles or diffuser). Turn on your hair dryer by moving the on/off switch
from 0 to I and turn it off again.
If the hair dryer has not been used for a long time, turn it on by moving
the on-off switch from 0 to I (Fig.9) and leave it on for a few seconds.
WARNING: DO NOT SWITCH THE HAIR DRYER ON WITHOUT THE FILTERS IN PLACE.
2) Then turn the hair dryer off, immediately press the speed selection or automatic cleaning button at
the bottom and press it for 5 seconds. (Fig.10)
The automatic cleaning cycle must be in the following sequence:
• Initially, the airflow will blow at full speed for 3 seconds to prevent any hair or dust residue from
remaining, and then it will stop.
• Immediately afterwards, the hair dryer will automatically start blowing air in the opposite direction,
towards the back of the hair dryer for 10 seconds to remove all dirt trapped in the filters. After the 10
seconds have elapsed, the motor will stop.
• At the end of the sequence, if you wish to perform a new automatic cleaning cycle, you will need to
wait 30 seconds.
During this process, make sure you keep both the air outlet and the
air out- and inlet free from obstructions and away from any surface or
exposed to any hair chemical airborne products, such a hairsprays.
At the end of the AUTOCLEANING session, the procedure is complete
and the hair dryer can be used normally.
To cancel the automatic cleaning cycle, press the activation button and
this will stop the procedure automatically. When an automatic cleaning
cycle is cancelled, it is not completed and therefore the hair dryer will
not consider it as valid.
The hair dryer is equipped with a system that calculates the motor
operating time after each auto-cleaning cycle.
This system will display a warning with a LED light when the time limit for a new cycle has been exceeded,
thus preventing damage to the motor that could affect the performance of the hair dryer. (Fig.11).
This warning will be displayed 12 hours after the last auto-cleaning cycle.
NOTE:
The warning LED will not turn off unless the entire self-cleaning process is performed.
If the LED flashes and the hair dryer turns off, the next power-up will take 5 to 10 seconds.
To operate normally, the hair dryer will need to perform a complete auto-cleaning process without
interruption.
If the process is cancelled, the hair dryer will not consider it as valid and therefore the activation steps must
be repeated (Fig.9 and Fig.10). Wait for completion and switch the hair dryer on again.
Once the entire process has been completed, the LED will stop flashing and the timer will reset.
If you run a complete auto-cleaning cycle before the warning appears, the timer will reset. The auto-cleaning
cycle can be activated as many times as desired.
2) Use the included cleaning accessories to remove dust and particle buildup on the filters to remove
heavily encrusted dirt. Wash under water, rubbing carefully inside and outside and make sure that the
water flows from the inside to the outside so that the dirt comes off. (Fig.13).
If dirt persists, we recommend using a cloth dampened with isopropyl alcohol, which acts as a
degreaser without leaving any residue. DO NOT USE detergents or products that are not
recommended. Dry the filter until all moisture is removed.
CAUTION: MAKE SURE FILTERS ARE COMPLETELY DRY AND FREE OF MOISTURE BEFORE PLACING
IN DRYER. CLEAN THEM FREQUENTLY.
3) Reposition the filters. Start with the fabric filter (PMF Tech) and then the micro-perforated metal filter. Be
careful, in both cases it is necessary to position them on the recessed guides and slide them gently without
applying pressure. If the filters are correctly positioned, the force of the magnet on the inside of the
STYLING TIPS
The iQ has exceptional airflow and pressure, so we highly recommend a unique drying setting
when styling to ensure hair protection and optimize the performance of the hair dryer. The recom-
mended drying setting for all hair types is the 2nd temperature level, while we suggest the 1st
temperature level for fine hair.
ERROR RECOGNITION / SELF-DIAGNOSIS
The hair dryer is equipped with multiple sensors that constantly monitor usage parameters. In
case of extreme or unusual use, the hair dryer will stop its operation or not turn on in order to
protect both the user and the product itself. Any anomaly detected by the hair dryer is indicated
by a flashing light code on the handle.
Since some types of anomaly are temporary (for example, an extreme use of the hair dryer which
generates an excess in temperature), we recommend to proceed as follows:
1- Turn the switch to the off position 0.
1.1 - Make sure the filters are clean. If not, perform proper maintenance before turning the power
back on.
2- Unplug the appliance from the power outlet.
3- After a few minutes, connect the appliance to the power outlet again and turn it on.
If the fault/abnormality is temporary, the hair dryer will operate normally. If, on the other hand, the
fault recurs, contact the assistance of the store or, in case of purchase on the online shop of the
manufacturer GA.MA, the customer service of the company.
N.B.: Since IQ is equipped with a sophisticated and sensitive electronic system, a change in
electrical voltage could cause an error signal and therefore a switch off of the device. This is
functional and it is a self-protection mechanism.
NOZZLES
The iQ2 Perfetto comes with 2 different sized
nozzles. They are designed with a double layer that
provides an air cushion, isolating the flow of hot air
from outside and preventing overheating to prevent
burns when touched. This also makes it easier to
change accessories.
In addition, the nozzles are equipped with
high-performance magnets to fix and adapt to
different positions. (Fig.17)
Fig. 17
DIFFUSER: This accessory, thanks to its depth and design, can be used to dry curly hair and create
hairstyles. (Fig.19).
STAR NOZZLE AND DIFFUSER INSERTION INSTRUCTIONS:
The outer shape of the venturi nozzle and diffuser is identical to the shape of the inner base of the
air outlet of the hair dryer. For this reason, you will need to match the two parts perfectly. Push,
therefore, gently inwards without exerting too much pressure, so as to leave a small gap between
the front metal ring and the accessory. (Fig.20)
Hanging ring, cleaning brush and
cloth. (Fig.21)
Fig. 21
VENTURI EFFECT
IQ's shape allows an easier Venturi
effect, i.e. the spreading of a higher air
flow due to the suction effect without
requiring and therefore consuming
additional energy. (Fig.22)
Fig. 22
On the website www.gamaprofessional.com it is possible to download the product's digital use
and maintenance manual.
28
30
32
34
5s.
36
Fig. 9
38
40
Fig. 13
42
44
Fig. 17
46
Fig. 19
48
50
careful when using it in the bathroom. For additional
protection, the installation of a residual current device (RCD,
as per its original English wording) having a rated residual
operating current not exceeding 30 mA is advisable in the
electrical circuit supplying the bathroom. Ask your installer
for advice. 3. Hair dryer accessories may become very hot
during use. Avoid contact with hot parts. 4. Turn the hair
dryer off when not in use, including for brief periods of time.
5. Do not immerse or wet the device.
6. ATTENTION: Do not use
this appliance near bathtubs
or other vessels containing
water.
with limited knowledge of the appliance itself, unless such
people have been trained for its use or are under adequate
supervision to ensure their own safety. Children must be
under supervision at all times to ensure that they do not play
with the appliance. 15. In case of improper use or failure to
follow instructions, the manufacturer assumes no liability and
the warranty will not apply. As part of our policy of constantly
improving our products, we reserve the right to change the
standard of the product. We are sorry if we should not be
able to notify you in a timely manner. 16. This is a device
suitable for safe use up to 2000mts (MSMM). 17. When the
appliance is plugged in, never leave it unattended. 18. If the
electric cord shows any signs of damage or wear, it should
be replaced by specialised personnel only. Do not use
fittings and/or accessories that have been modified or that
have not been approved by the manufacturer.
This marking is only valid for products
distributed in EUROPE.
PRODUCT WARRANTY
The product warranty is governed by regulations in force and
applied upon showing the original legible purchase receipt
complete of all its parts. For support service under warranty,
please take the original purchase ticket / sales receipt to the
shop where the product was purchased.
AIR FLOW SPEED
The hair dryer is equipped with an air flow adjustment button.
By pressing the top, the air flow increases as shown by the white indicator lights. To decrease the
flow, press the bottom part of the adjustment button. (Fig.3)
Fig. 1
Fig. 2
TEMPERATURE SETTINGS
The hair dryer is fitted with 4 temperature levels that can be adjusted by pressing the dedicated
button. By pressing the upper part of the button, the temperature increases as indicated by the 3
red indicator lights. To decrease the temperature, press the bottom part of the button. (Fig.4)
MEMORY FUNCTION
The hair dryer has a memory function that remembers the user's operating preferences. When the product
is turned off, the last air speed and temperature settings are stored, so that when the dryer is turned back
on, it automatically goes back to those saved settings.
Fig. 5
However, if the dryer is disconnected from the plug for an extended period, the factory setting will be
restored.
CLEANING AND MAINTENANCE
The iQ hair dryer features a micro-perforated metal filter and fabric filter
specially designed to prevent dirt from the environment from getting
through to the motor and hair. For protection purposes, the hair dryer
may shut down if there is an excessive buildup of dirt in the filters. When
Fig. 6
this happens, the white LED light will stop flashing, remaining on and
indicating that the filters need to be cleaned. (Fig.8)
For proper maintenance and cleaning of the hair dryer, it is recommended to perform the self-cleaning cycle
after each use, and a deep cleaning of the filters at the end of each day to ensure optimal durability and
performance of the hair dryer.
WARNING, the accumulation of dirt resulting from the improper cleaning of the filter may result in engine
Fig. 7
damage and affect the hair dryer's performance.
Fig. 9
Fig. 10
PROPER CLEANING PROCESS OF THE FILTERS
The hair dryer is equipped with two removable filters: a micro-perforated metal filter which in turn
contains an internal fabric filter (PMF Tech) to effectively filter dust and particles in the environment.
They can be easily removed for proper cleaning under water to remove all trapped dirt.
Fig. 11
For professional users, the manual cleaning process should be performed daily. In case of domestic
use, it can be performed weekly.
MANUAL CLEANING
1) With the hair dryer turned off and unplugged, pull the MICROPERFORATED metal filter out, gently
pulling backwards to remove it completely. Repeat the same operation to remove the fabric filter (PMF
Tech). (Fig 12)
micro-perforated metal filter will make it slide and position it correctly. Rotate it until the arrows (Fig. 14) are
perfectly aligned.
WARNING: If the filters are inserted incorrectly, excessive pressure could damage the item and even cause
it to break.
ACCESSORIES
SMART PAD AND AUTOMATIC STOP
The hair dryer is equipped with a sensor that automatically
stops its operation by placing it on the mat, called SMART
PAD, (Fig.15), specially designed for this product. Lifting it
and moving it away from it, the hair dryer returns to its
normal operation.
This new function allows to efficiently manage the time of
use.
In order to stop automatically, the hair dryer must be at a
short distance from the SMART PAD.
Avoid placing any objects near the sensor of the Smart Pad,
which may fall when using the hair dryer.
OPERATION
When you place the dryer close to the sensor of the SMART
PAD, the dryer will automatically stop and the LEDs
indicating air speed and temperature selection will start
flashing. (Fig.16)
Once the hair dryer is moved away from the sensor, it will
automatically resume operation.
N.B.: After 5 minutes during which the hair dryer is in
automatic stop or rest mode, it will automatically shut off. To
reactivate it, turn it off and on again.
ACCESSORY INSERTION INSTRUCTIONS
Each nozzle has a magnetic attachment and mechanical locking. To position it, you need to
gently bring it closer to the hair dryer and the magnets will complete the positioning. Once
positioned, to lock it you will need to rotate it clockwise.
To remove it, first you will need to rotate it to unlock it and then pull to release the magnets.
CAUTION: To avoid damage, ALWAYS unlock accessories and then pull to remove them.
STAR NOZZLE: This new accessory generates an even air flow, ideal for fine or damaged hair.
Thanks to the Venturi effect, it increases the air flow and distributes it outward.
Its design prevents the airflow from damaging the hair. (Fig.18)
Fig. 20
WARNING:
Do not use this appliance
near bathtubs or other vessels
containing water.
29
31
33
35
37
5s.
39
Fig. 12
41
43
45
Fig. 18
47
49
Fig. 3
Fig. 4
Fig. 8
Fig. 14
Fig. 15
Fig. 16