Cord Phono Stage Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cord Phono Stage. Cord Phono Stage 10 pagina's.

Important Safety Information:

Some Do's and Don'ts on the Safe Use of this Equipment

This equipment has been designed and manufactured to meet international safety standards but, like

any electrical equipment, care must be taken if you are to obtain the best results and safety is to be

assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and

inter-connections between the pieces of equipment) are properly made and in accordance with the

manufacturer's instructions. Switch off and disconnect the mains plug before making or changing any

connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your

equipment.

DON'T remove any fixed cover as this may expose dangerous voltages.

DON'T overheat the unit which can cause damage and shorten the life of the equipment.

DON'T allow electrical equipment to be exposed to dripping or splashing, or allow objects filled with

liquids, such as vases or drinking glasses, to be placed on the equipment at any time.

DON'T place hot objects or naked flame sources such as lit candles or nightlights on, or close to

equipment. High temperatures can melt plastic and lead to fires.

DON'T listen to headphones at high volume, as such use can permanently damage your hearing.

DON'T leave equipment switched on when it is unattended. Switch off using the switch on the

equipment and make sure that your family knows how to do this. Special arrangements may need to

be made for infirm or handicapped people.

DON'T continue to operate the equipment if you are in any doubt about if it's working normally or if

it's damaged in any way. Switch it off and withdraw the mains plug and consult your dealer.

ESD Remark: In case of malfunction due to electrostatic discharge just reset the product

(reconnection of power source may be required) to resume normal operation.

NOTE: Do not open any covers and do not repair yourself. Qualified personnel must carry out repair

work.