aireRyder FN52998 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} aireRyder FN52998. aireRyder FN52998 9 pagina's.

Pagina afdrukken

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE

SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN

DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

THIS FAN MUST BE INSTALLED WITH A WALL CONTROL/SWITCH.

SAVE ALL INSTRUCTIONS.

NOTE: The fan weight is 18.4 lb (8.3 kg). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failure to do so can result in serious injury.

Installation Steps :

Fig.1

Turn OFF the electric power at the

main fuse or circuit breaker box.

Housing

Fig.3

(For ceiling mount only):

Attach the canopy to the housing with

three ceiling mount screws.

Go to Fig.9 for the next step.

Fig.6

Downrod Stand

Cover

Motor Wires

Hanger Pin

Insert the Downrod into the Collar.

Slide Hanger Pin through holes of

Collar and Downrod.

Wood Member

(2" x 4" Approx.)

Ceiling

Tighten the hanger bracket to the outlet box with two mounting screws. (Make

sure the outlet box is securely installed so that it will be able to support

at least the fan weight.)

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED

Fig.4

Hanger Pin

Remove the Lock Pin and take off

the Hanger Pin.

Fig.7

Downrod

Canopy

Collar Screws

Collar

Insert and tighten the two Collar

Screws. Slide Lock Pin into Hanger

Pin until it locks into position.

Ceiling Joist

Junction Box

Hanger Bracket

"ACCEPTABLE FOR FAN SUPPORT"!

Lock Pin

PAGE: 1 / 4

Fig.2.

Fig.5

Downrod Stand

Cover

Motor Wires

Thread the motor wires through the

canopy, downrod stand cover and

downrod.

Fig.8

Hanger Bracket

Hang the fan on hanger bracket,

and make sure the slot of hanger

ball is snapped into the chip of

hanger bracket exactly.

Note: For slope ceiling installation,

make sure the slot of hanger ball

and the chip of hanger bracket is

face down.

101227

Downrod

Canopy

Slot

Chip