Gamber Johnson 7160-0194-05 Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Gamber Johnson 7160-0194-05. Gamber Johnson 7160-0194-05 6 pagina's. Gd8000 docking station
Pagina afdrukken
Ground to Vehicle Chassis
-
Vehicle Battery
Connect in-line fuse holder to lead
wire using Panduit #BSN14-C
Butt Splice connectors
Inserting the computer
into the vehicle dock
1. Make sure the latch handle is in the
"Unlatched" position. If you received the
dock in the latched position, you will need
to unlatch it before inserting the computer.
To unlatch the dock, press the latch button
and pull forward on the latch handle. The
latch handle should move forward about
1/4". (See Figure 3)
2. Insert the computer: (See Figure 4)
a. Align the center notch in the
computer with the front retaining
hook.
b. Lower the back of the computer
down onto the locating pins and
docking connector. Press
downward slightly to make sure
the computer is resting on the
bumpers mounted on the deck.
14 AWG (black wire) J1128 TYPE GPT
10"
Fuse
+
Figure 2
14 AWG (red wire) J1128 TYPE GPT
Figure 3
Figure 4
Panduit #BSN14-C
Butt Splice connects to
black lead from dock
Panduit #BSN14-C
Butt Splice connects to
red lead from dock
Latch button
Latch Handle in
"Unlatched" position
Page 4 of 6