Gamber Johnson 7160-0883-03 Installatie-instructies - Pagina 5
Blader online of download pdf Installatie-instructies voor {categorie_naam} Gamber Johnson 7160-0883-03. Gamber Johnson 7160-0883-03 5 pagina's. Cradle dell rugged laptop
Pagina afdrukken
1. If the cradle is in the closed position,
push the latch button to open the
latch.
2. Insert the front of the DELL laptop
under the front hooks on the cradle,
such that the tabs on hook goes into
the pockets in the laptop. Look at the
handle to make sure the front of the
computer is centered on the front
hooks.
3. Lower the back of the laptop down
onto the cradle and the docking
connector.
4. Lightly press down on the back of
the laptop (center) to ensure it is fully
seated while closing the latch.
5. The rear hook will engage the back
of the computer to hold it in place.
TO UNDOCK THE COMPUTER
1. Press the Latch Button. The front
latch is spring loaded and will
automatically open.
Lightly press down on the back of the
laptop (center) and the rear hook will
retract from the laptop.
2. Lift the back of the computer off the
cradle and docking connector.
3. Pull the front of the laptop out from
under the front hooks.
DOCKING THE COMPUTER
SCREEN SUPPORT ACCESSORY
A screen support (7110-1213), is
recommended for installations in
environments with high vibration.
*screen support (7110-1213) sold seperately
Attach the screen support to the cradle using
#6 screws(2x) provided in the hardware bag.
The screen support could be attached on
either side of the cradle.
5/5