Gamber Johnson Notepad V-LT Installatie-instructies - Pagina 2

Blader online of download pdf Installatie-instructies voor {categorie_naam} Gamber Johnson Notepad V-LT. Gamber Johnson Notepad V-LT 5 pagina's. Universal cradle & accessories

Pagina afdrukken

Rear Support Assembly

Two Rear Support Clips must be assembled at the time of installation.

Attach each Rear Support & Brace to Tee Nut located in channel on back edge of

Notepad™V-LT using a #8-32 x .38 Socket Head Screw.

Attach the Long Rear Clip and Short Rear Clip to appropriate Rear Support & Brace

with a #8 external tooth washer, Flat Washer and a #8-32 x .38 Socket Head Screw.

Short Rear Clip

Vehicle Mounting

The Notepad™V-LT Universal Cradle is designed to be used with Gamber-Johnson

motion attachments, poles and vehicle bases.

The Sliding Mount Bar feature allows side-to-side adjustment of cradle to desired

mounting position.

Four .25 Flat Washers and .25-20 x .62 long Hex Head Screws are supplied

in the hardware bag to secure motion attachments to the bottom side of the cradle.

#8 External Tooth Washer, Flat Washer &

#8-32 x .38 Socket Head Screw

Sliding Mount Bars on bottom surface

Long Rear Clip

#8 External Tooth Washer, Flat Washer &

#8-32 x .38 Socket Head Screw

.25-20 x .62 Hex Head Screws

& .25 Flat Washers

2 / 5