Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T Handmatig - Pagina 9
Blader online of download pdf Handmatig voor {categorie_naam} Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T. Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T 18 pagina's. Pack 8
Ook voor Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T: Handmatig (18 pagina's), Handmatig (18 pagina's), Handmatig (18 pagina's), Handmatig (18 pagina's)
Pagina afdrukken
FRONT SECTION
OF THE CHASSIS
10.7
a
liGn
front right spindle (piece 2) 9F. Insert the last ball joint
10A into the spindle 9F from underneath and attach
with a type JM screw.
10D
10C
JM
the free ends of the tie rod 10B with the
CM
7A
10E
10A
10.6
5D
Insert it into the forked end of the left tie rod 5D. Join them together with
a type JM screw.
10B
10A
10.8
ensure they are positioned correctly and then fix in place with two type
CM screws.
MODEL-MAKER'S TIP
You can change the wheel alignment slightly by varying
the position of the screws that hold the tie rod end links
and the two anchors together.
39
STAGE 10
T
ake
the chassis you have built so far and position it
as shown in the illustration. Insert a ball joint 10A into
the second hole in the left end of the central bar 10C.
JM
a
liGn
the left tie rod anchor 10D and the right tie
rod anchor 10E with the holes in the edge of the
engine guard plate 7A. Look at the illustration to
9F