GAME SolarPRo Xd1 4512 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} GAME SolarPRo Xd1 4512. GAME SolarPRo Xd1 4512 12 pagina's. Pool heater

GAME SolarPRo Xd1 4512 Gebruikershandleiding
1.

SAFETY WARNINGS

Carefully read and adhere to all CAUTION and NOTE notices located throughout this manual
Failure to comply with these instructions can cause serious injury, death, or damage to the unit
Do NOT allow children to operate this product
Always turn the filter system to a setting that does not allow flow to the pool return when installing
or working on the solar heater
Install product away from the pool to prevent children from using the heater as a way to access the pool
NEVER service this unit with the pool pump running
Do not use any petroleum based lubricant Petroleum based products will destroy plastic parts
THESE CAUTION WARNINGS ARE NOT INTENDED TO INCORPORATE ALL POSSIBLE INSTANCES
FOR RISK AND/OR SEVERE INJURY. THE POOL OWNER SHOULD ALWAYS EXERCISE CAUTION
AND COMMON SENSE WHEN UTILIZING THEIR SWIMMING POOL AND OPERATING EQUIPMENT.
2.

GENERAL INFORMATION

This manual provides information relating to the installation, utilization and maintenance of our solar heater We recommend you
read this manual in its entirety and keep it for future reference
The solar heater you just purchased for your above ground pool is simple to install and effortless to operate once connected The
installation instructions included in this manual are based on a few assumptions: 1) you have an existing above ground pool that is
completely set up and filled with water, 2) your above ground pool is equipped with a pump-operated water filtering system, and 3)
you have the necessary hoses needed to feed water in and out of your pool and filter system
These assumptions are necessary as the solar heater, once installed, will be completely dependent upon your pool's filter pump to
push water in and through the heater's solar coils

How It Works

When properly installed, the solar heater will be connected to your filter and your pool by two hose connections: One hose will feed
cold, filtered pool water from your pump into one port of the solar heater The other hose will feed sun warmed water from the other
port of the solar heater to your pool via the pool return inlet in your pool As cold water is fed into the solar heater, it travels through
the solar coils where it is heated by the sun before it is delivered back into your swimming pool

Unpacking Your Solar Heater

Carefully remove the product and all component parts from the box Make certain all parts are present before beginning assembly
(see Section 2, Parts List/Reference)
Refer to Appendix for a complete EXPLODED VIEW PARTS DIAGRAM.
Tools & Equipment Required
The following items are not included with your new solar heater, but will be required for proper installation and operation:
#2 Phillips screwdriver
¼" Flat head screwdriver
Silicone based lubricant

Know Your Pool

Before you begin installation it is a good idea to know certain specifications about your pool:
How big is your pool?
How many gallons does it hold?
What size hose does it use? (i e 1¼" dia, 1½" dia or 2¼" dia)
What kind of hose connection does your pool use? (i e threaded/unthreaded)
What location will position the heater for maximum sun exposure?
SAVE THESE INSTRUCTIONS
READ ALL WARNINGS BELOW. FAILURE TO DO SO COULD RESULT
IN SERIOUS PERSONAL INJURY OR DEATH.
4
Meijer.com