Deagostini MODEL SPACE Honda CB750 FOUR Montagehandleiding - Pagina 13

Blader online of download pdf Montagehandleiding voor {categorie_naam} Deagostini MODEL SPACE Honda CB750 FOUR. Deagostini MODEL SPACE Honda CB750 FOUR 16 pagina's. Pack 12
Ook voor Deagostini MODEL SPACE Honda CB750 FOUR: Montagehandleiding (16 pagina's), Montagehandleiding (20 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's)

Pagina afdrukken
Deagostini MODEL SPACE Honda CB750 FOUR Montagehandleiding
Display base
4 × 9mm
screw with
washer
A
Base frame 5
Base frame 1
Base frame 3
By now, you will have received three
parts of the display base frame. With
Stage 52: base frame 1, joint E, joint
A and a connecting pin. With Stage
54: base frame 5, joint E and four 4 ×
9mm screws with washers. With Stage
55: base frame 3, joint C and four 4 ×
9mm screws with washers.
D
4 × 9mm
stepped
screws
Use two 4 × 9mm stepped screws to
fit joint A to the other end of base
frame 1.
4 × 9mm stepped screw
These are the two screws that are used to assemble the
Step
display base: a 4 × 9mm stepped screw and a 4 × 9mm
screw with washer.
B
4 × 9mm screws
with washers
Use two 4 × 9mm screws with
washers to fit joint E to the end of
base frame 1. Do not tighten the
screws fully.
E
4 × 9mm
screws with
washers
Fit a joint E to the end of base frame
5 (Stage 54).
Honda CB750 FOUR: Assembly Guide
C
Make sure that the joint can still
move a little. It will be secured later.
Base frame 1
F
Base frame 5
Put the ends of base frames 1 and 5
together to make a corner, as shown.
269