Deagostini Model Space HUMMER H1 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Deagostini Model Space HUMMER H1. Deagostini Model Space HUMMER H1 18 pagina's.

HUMMER H1: STEP BY STEP

1 1

Remove the cellophane tape holding together the parts that

make up the radio box.

3 3

Inspect the underside of the radio box upper. There are four sets

of screw holes lining the rectangular openings. These will be

used in the coming steps.

5 5

When the projections on the underside of the radio box are

lined up with the six holes circled in Step 4, begin inserting

the 3 × 8mm self-tapping screws, starting with the two central

holes circled above. Place the screw into the hole nearest the

front first.

2 2

Lay out the parts and make a note of which is which. To the

bottom left (1) is the box upper, at the top is the box lower (2)

and to the bottom right (3) is the lid. Also make a note of their

orientation, as this is the position in which they will be fitted

onto the chassis.

4 4

Line up the radio box lower with the six holes circled on the

surface of the chassis. The hole circled in blue marks the hole

through which you will fit the 3 × 10mm self-tapping screw.

6 6

Tighten the screw with a screwdriver.

208

™