Deagostini Model Space HUMMER H1 Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Deagostini Model Space HUMMER H1. Deagostini Model Space HUMMER H1 18 pagina's.

HUMMER H1: STEP BY STEP

1 1

Prepare the above parts saved from Stage 46. Lay out the steering

rod, four 3 × 10mm binding-head self-tapping screws, and a 3 ×

3mm set screw.

The steering servo will fit

in place neatly, so that the

screw holes align (circled).

5 5

Tighten with a screwdriver,

again only lightly.

3 3

Turn the screw into place

with a screwdriver, but

only gently at this stage.

7 7

2 2

Place one of the 3 × 10mm

binding-head self-tapping

screws into the first hole

(see arrow).

6 6

Add the remaining two

3 × 10mm screws saved

from Stage 46 into the

free holes and tighten all

four in the order shown

in the photo.

211

Hold the radio box upper

so that its underside is

facing up, then place the

steering servo into the

rectangular space so that

the screw holes on both

parts line up.

4 4

Rotate the assembly and

insert the next 3 × 10mm

screw into the hole on

the other side, diagonally

opposite the one fitted in

Step 5.

8 8

™