AgTerra SprayLogger E3 Installatie- en snelstarthandleiding - Pagina 10

Blader online of download pdf Installatie- en snelstarthandleiding voor {categorie_naam} AgTerra SprayLogger E3. AgTerra SprayLogger E3 16 pagina's.

Unit Setup

1) Plug SprayLogger E3 unit into the power supply. Please note that your power

supply may need to be powered with a vehicle power inverter (not included).

2) At least one flow sensor is required for SprayLogger. This sensor is always

connected to Port A on the box.

3) Use the power button to turn on the box (button will show blue light).

Important!

few seconds once you start a spray job in the MapItFast app. The

blinking light indicates that your box has a GPS signal. If the light does

not begin blinking within two minutes of powering on the box, try

rebooting the SprayLogger unit by powering it off and back on again.

You will first need to 'pair' your device with your SprayLogger.

1) Find Bluetooth settings on your mobile device.

2) Available devices will display in menu (may need to 'Scan' for

available devices). Be sure your unit is turned on.

3) When unit is located, your device will ask to confirm pairing of

SprayLogger box.

Make sure that the blue LED light on your box blinks every