HIKOKI WR18DH Handling Instructies Handleiding - Pagina 15

Blader online of download pdf Handling Instructies Handleiding voor {categorie_naam} HIKOKI WR18DH. HIKOKI WR18DH 20 pagina's.

Symptom

Tool suddenly stopped

Tool sockets

-can't be attached

-fall off

-can't be removed

Switch can't be pulled

An abnormal high-pitched noise

occurs when the trigger switch is

pulled.

Battery cannot be installed.

(WR36DH)

Possible cause

Tool was overburdened

The battery is overheated.

The trigger switch was held down for

5 minutes or more.

The shape of the attachment portion

doesn't match

The Push button is positioned

halfway

The trigger switch is being pulled only

slightly.

Attempting to install a battery other

than that specified for the tool.

Remedy

Get rid of the problem causing the

overburden.

Let the battery cool down.

This is not a malfunction.

The motor was automatically stopped

to prevent failure of the tool.

Be sure to use 12.7 mm square drive

sockets.

Press the button firmly into position

for the desired direction of rotation.

This is not a malfunction.

It does not occur if the trigger switch

is pulled more fully.

Please install a multi volt type battery.