Dean Stoves 105SE Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Dean Stoves 105SE. Dean Stoves 105SE 16 pagina's. Inset

Door Operation

The door handle can become very hot so use the glove provided.

Handle:-

When closed the door handle will be pointing down and straight with the door.

Twist the door handle about ¼ of a turn anti – clockwise to open the door.

Primary and secondary air controls situated below the door

The primary air control is indicated with a single ring turned into the control knob. This control

is used for lighting the fire or boosting the fire. This is also the main control when burning

solid fuel. Pull fully out for maximum air flow to the fire and fully in to close the air flow.

The secondary air wash control is indicated with double ring turned into the control knob. This

controls the preheated air wash system. Once the fire in the stove is established this is the

control that should be used to control the fire when burning wood.

The secondary control works as follows:

Pull out fully for maximum air flow into the fire and fully in for minimum airflow to the fire.

Once a fire is established push the secondary air control in until required flame pattern is

achieved, approximately 75% closed. When operating at the low output setting (with the

DEFRA stop fitted) it is necessary to leave the door ajar for a period of 1 – 2 minutes in order

to sustain flames on the newly charged fuel. The appliance must not be operated with the air

controls or door left open except as directed in the instructions.

Controlling the stove

Diagram A:

Primary = A

Secondary = B