HIKVISION CMHT1833 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION CMHT1833. HIKVISION CMHT1833 2 pagina's. Turbo hd tvi turret & bullet camera
Pagina afdrukken
Figure 2-3 Secure the Camera
6.Adjust the camera according to the figure below
to get an optimum angle.
Figure 2-4 Universal Adjustment
7.Use the screwdriver to adjust the ZOOM screw
and the FOCUS screw until you get the optimum
image.
Figure 2-5 Zoom and Focus Adjustment
2.2 Installation of Type II Camera
Both wall mounting and ceiling mounting are
suitable for type bullet camera. Ceiling mounting
II
will be taken as an example in the section. And you
can take steps of ceiling mounting as a reference
if wall mounting is adopted.
Steps:
1.Drill the screw holes and the cable hole in the
ceiling according to the supplied drill template.
2.Hammer the supplied plastic expansion bolt into
the screw holes.
Figure 2-6 Drill Template
3.Route the cables to the cable hole and connect
the corresponding cables.
4.Fix the camera to the ceiling with the supplied
screws.
Figure 2-7 Fix the Camera to the Ceiling
5. Adjust the surveillance angle.
1). Loosen No.1 adjusting screw to adjust the pan
°
°
position (0 ~ 360 ).
2).Tighten No.1 adjusting screw.
3). Loosen No.2 adjusting screw to adjust the
°
°
tilting position(0 ~ 90 ).
4).Tighten No.2 adjusting screw.
5). Loosen No.3 adjusting screw to adjust the
( °
° )
rotation position 0 ~ 360 .
6).Tighten No.3 adjusting screw.
0~360
1
2
0~90
3
0~360
Figure 2-8 3-axis Adjustment
6.Push the focus &zoom adjustment cover upward
to move it aside.
7.Use the cover as a screwdriver to adjust the ZOOM
screw and the FOCUS screw until you get the
optimum image.
Focus
Cover
Zoom
Cover
0~360
Figure 2-9 Zoom and Focus Adjustment
3 Menu Operation
Menu
AWB
AE
SPECIAL
VIDEO. OUT
DAY&NIGHT
SYSTEM
EFFECT
AUTO
PRIVACY
FRAME
DC
CAMERA
COLOR
COLOR
ZONE
RATE
GAIN
ID
USER
ESC
COLOR
MOTION
B/W
ID DISP
HUE
HOLD
HOLD
HLC
NAME
AUTO
SHARPNESS
DISP
8000K
CONTRAST
LANGUAGE
EXT
6000K
FACTORY
BRIGHT
INIT
4200K
MIRROR
3200K
FLIP
PUSH
Figure 3-1 Main Menu
A coaxial camera controller (purchase separately)
is required to select the menu and adjust the
camera parameters.
3.1 VIDEO.OUT
You can set the frame rate as 25 fps/30fps.
3.2 DAY/NIGHT
Color, B/W, AUTO and EXT are selectable for DAY/
NIGHT switches. Under the mode of the AUTO and
EXT, you can set the IR LED as Smart and CDS. If the
IR LED is selected as Smart, you can set the bright-
ness of the IR LED.
DAY/NIGHT
SPECIAL
1. PRIVACY
ZONE
1. MODE
AUTO
2. MOTION
2. D TO N
63
3. HLC
3. N TO D
63
4. RETURN
RET
4. DELAY TIME
20
5. RETURN
RET
Figure 3-4 SPECIAL
Figure 3-2 DAY/NIGHT
3.3.3 AWB
Auto, User, Push, 8000k, 6000k, 4200k and 3000k
are selectable for AWB. Under the mode of AUTO,
you need to set the R-G/B-G Gain and to select an
indoor/outdoor mode. If the AWB mode is select
as User, You need to set the R/G/B Gain manually.
3.3.4 AE
You can set the AE mode as HOLD, DC and ESC.
Brightness
: Brightness refers to the brightness
of the image.
Shutter
: Shutter denotes the speed of the shutter.
You can set the shutter as AUTO, 1/25, 1/30, 1/50,
1/60, 1/100, 1/120, 1/250, 1/500, 1/1k, 1/3k and
1/10k.
Flicker
: You can set the flicker status as 50HZ/60HZ
to prevent image flicking.
BLC
: BLC bases on the back area to enhance the
brightness of the whole image. You can set the
BLC gain from 0 to 16.
AGC
: AGC optimizes the clarity of image in poor
light scene. The value of AGC can be set from 1-5.
LSC
: LSC corrects the phenomenon where the
image gets darkened or blurred on the periphery.
AWB
1. MODE
AUTO
2. R-G GAIN
255
EXIT
3. B-G GAIN
151
4. RETURN
RET
Figure 3-3 AWB
3.3.5 SPECIAL
Privacy zone: Select a PRIVACY area. Set the
MASK PAT as OFF, GRAY, WHITE or BLACK. Set the
SX/EX/SY/EY value to define the position and size
of the area.
Motion: Set the Motion status as ON or OFF. Set
the SENSITIVITY from 0 to 255. Set the alarm status
as ICON/TRANCE/OFF. Set the hold time from
0 second to 255 seconds.
HLC: HLC supplements the brightness of the
peripheral area of the image. You can set the mask
value and threshold from 0 to 255.
3.3.6 EFFECT
Color Gain: Color gain adjust this feature to change
the saturation of the color. You can set the value
from 0 to 255.
Color Hue
: You can adjust the image HUE from
0 to 71.
Sharpness
: Sharpness determines the amount of
detail that an imaging system can reproduce.
You can set the value from 0 to 255.
Contrast
: Contrast enhances the difference in
color and light between parts of an image.
You can set the value from 0 to 255.
Bright Off.
: Bright Off. refers to the brightness
compensation of the image. You can set the bright
compensation value as 0 or 1.
Mirror
: You can set the Mirror status as ON/OFF.
Flip
: You can set the FLIP status as ON/OFF.
EFFECT
1. COLOR GAIN 200
2. COLOR HUE
200
1. CAMERA ID
3. SHARPNESS
25
2. ID DISP.
4. CONTRAST
150
3. NAME DISP.
5. BRIGHT OFF.
1
4. LANGUAGE
5. FACTORY INIT
6. MIRROR
ON
6. RETURN
7. FLIP
ON
8. RETURN
RET
Figure 3-6 SYSTEM
Figure 3-5 EFFECT
3.3.7 SYSTEM
You can set the camera ID from 0 to 255.
Select the ID display and name display status as
ON/OFF.
Chinese and English are selectable for the language
of the menu.
You can restore the camera to the default by
setting the factory initialization status as ON.
3.3.8 EXIT
Exit and Save & exit are selectable.
SYSTEM
255
ON
ON
ENG
OFF
RET