Maiwe MIEN6208-2S Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Maiwe MIEN6208-2S. Maiwe MIEN6208-2S 20 pagina's. Management industrial ethernet switch
Pagina afdrukken
MIEN6208 Series Management Industrial Ethernet Switch
Serial port network management port (CONSOLE)
The network management port is an RJ45 interface. Please use the serial
port extension cable provided by our company to connect to the PC's serial
port.
The letter standard is 3-wire RS-232.
The communication parameters of the serial port are as follows: baud rate:
9600, data bit: 8, parity bit: none, stop bit: 1, flow control: none.
Indication lights：
LED
PWR1/ PWR2
RUN
LINK
Each Ethernet RJ45 port has two indicators, a yellow light for the port rate
indicator and a green light for the port connection status indicator.
10/100M
（Yellow light）
LINK/ACT
（Green light）
3.2. Hardware Installation
3.2.1. Din-rail installation
This series equipment back panel have fixed well DIN rail-way connection
seat. If need installation, please check DIN rail way condition . Main including 2
terms :
Condition
s
System status LED
The power is connected and working
on
properly
The power is unconnected or working
off
abnormal
blinking
The system is running normally
off
The system is running abnormal
off
Ring close
Fiber port status LED
The port has established an active
On
network connection
blinking
Port has network activity
The port does not have a valid network
off
connection
Ethernet RJ45 port status LED
On
100M （100Base-TX）
off
10Mworking status（10Base-T）
The port has established an active
on
network connection
blinking
Port has network activity
The port does not have a valid network
off
connection
- 9 -
Status