deante Temisto NAC-04QT Onderhoudsinstructie - Pagina 3

Blader online of download pdf Onderhoudsinstructie voor {categorie_naam} deante Temisto NAC-04QT. deante Temisto NAC-04QT 20 pagina's.

Pagina afdrukken

INSTALLATION

• Before making any inlet pipe connections, all

supply pipes must be throughly flushed to remove

debris. Failing to do this may cause demage of the

cartridge or low water flow.

• The place and way of installation needs to ensu-

re free access to any possible dismantling and a

possibility of carrying out maintenance or repair

activities.

• The product should be installed by a persons

with appropriate qualifications. For a built-in pro-

duct, the Purchaser should check its proper ope-

ration before installation in the presence of the

person supervising the operation of the product.

Any possible damage caused as a result of unpro-

fessional assembly or maintenance is not covered

by warranty.

• Mounting valves on any type of extensions /

reducers is not recommended. Mixer installation

should be carried out using all original compo-

nents included in the product and supplied by the

producer.

• To purchase parts, contact producer via zamien-

[email protected]

• In line with a possibility of contamination of the

water which may cause product damages it's ne-

cessary to use angle, check valves with filters in

the connection between mixer hoses to the instal-

lation, or sealing screen for wall mounted mixers

and showers.• Flexible hoses must not be bent or

twisted. Hoses may only be screwed into the fit-

ting by hand.

• Products are intended for indoor installation. Do

not allow the product or water inside to freeze.

• It is recommended to turn off the main water va-

lve during long absence.

• Do not leave the product unattended during a

pressure test.

• It is not advisable to use a thermostatic tap with

flow gas and electric water heaters.

• The Warrantor reserves the right to make pro-

duction changes and corrections of the product

arising from technological progress and aesthetic

values without prior notice.

• The manufacturer declares that the colour (sha-

de) of a product from the same line may be slightly

different and is in a similar shade. The difference in

shade is not a defect of the product and may result

from the normal production process.

www.deante.pl

Requirements for taps other than thermostatic

taps:

min

max

°C

Requirements for thermostatic taps:

MAINTENANCE

A user is obliged to clean the following on a regu-

lar basis: aerator, ball valves with a filter, product

surface, to check connections of hoses, filters.

Recommendation:

• use a soft cloth

• do not use chlorine or alcohol based cleaner,

strong acids, bases or solvents

• do not use cleaner with cleaning beads

• use biodegradable cleaning agents with a delica-

te structure based on fruit acids, ie recommended

Deante agents.

• product should be at the room temperature du-

ring cleaning

• After cleaning, rinse the washed surface thoro-

ughly to get rid off residual chemicals and wipe

dry.

• Do not use high pressure or steam cleaners

Details of the warranty on www.deante.eu

www.deante.eu

4-5