deante ADR 0821 Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} deante ADR 0821. deante ADR 0821 16 pagina's.

Mirror assembly instruction

1. The IP44 standard allows for the mirror to be instal-

led in zones 2 and 3 of the bathroom, i.e. in close

proximity to the bathtub, shower cubicle and wa-

shbasin, defined in the area of up to 60 cm in each

side and in the further vicinity of sanitary facilities,

designated in an area with a width of 2,4 m.

2. No tools are needed for the installation.

3. The mounting plates included are equipped with

a very strong double-sided 3M adhesive tape.

4. It is recommended to install the mounting plates on

clean, dry and smooth surfaces, such as mirrors, ti-

les, metal, ceramics.

5. Plates cannot be applied to rough, uneven or crum-

bling surfaces, e.g. wood, plaster, painted surfaces,

raw.

6. Before sticking them to the target surface, make sure

you select the planned space for installation.

7. The sticky mounting plate may be difficult to remo-

ve/peel off. Use tools and appropriate fluids to dis-

solve the glue.

8. Mounting the mirror to the previously glued plate

must be slow and gentle due to the strong magnet

mounted in its housing.

9. The mirror should be mounted on the plate so that

the entire surface of the mounting base adheres to it

evenly.

10. The appliance is intended for private, domestic use

only, and is not suitable for commercial purpo-

ses.

Product disposal

Packaging elements in the form of cardboard, pa-

per and similar materials should be transferred

to waste paper or thrown into waste paper con-

tainers.

The EPE foam box filling is 100% recyclable. Pla-

stic components, such as foil, should be thrown

into containers intended for plastics.

The worn or damaged mirror light fixture must not

be thrown away from normal waste. They should

be handed over to the appropriate electrical and

electronic waste disposal plant.