Adexa EG-548-1 Handmatig - Pagina 4
Blader online of download pdf Handmatig voor {categorie_naam} Adexa EG-548-1. Adexa EG-548-1 6 pagina's. Electric griddle/grill
material of this sort left in the appliance may melt and/or burn when the appliance are used.
2. Check for visible damage of the appliance and the power cord. Do not use the appliance any
more if you find the power cord or some parts of this product are damaged.
3. Check the supply voltage from the fixed wiring matches the value indicated on the appliance.
Do not connect the appliance to the fixed wiring when the voltage does not match the rated
value indicated on the appliance
4. Place the appliance in a location with superior ventilation system and far away from tinder
and explosive object, and place the appliance on a smooth horizontal and stable surface, and
Keep good heat dissipation — When operating the appliance, keep at least 50mm space on
all side of the appliance to allow adequate air circulation.
5. Connect the appliance to the fixed wiring in accordance with the national wiring rules and
connection diagram in the appliance
IV.
Operating Instruction:
Before use, please check whether the voltage of power supply is in conformity with that in the
value indicated on the marking plate.
Operating steps:
1. Switching on the appliance by connecting the disconnection device in the fixed wiring, and
then the indication light is on green to indicate the appliance is in STAND BY MODE. Adjust
the working temperature to the required one, now working light is on yellow, the heating
plate is working. After tested, the user can re-adjust the thermostat knob, select the
required temperature for working again.
2. When the temperature reaches the setting one, the yellow light will turn off, then it will turn
into the thermostat state, the user can start to work. When the temperature comes down,
the thermostat will start working again automatically.This process is cycling repeatedly,
guarantee the temperature is on the set up scope.
3. The grill with two thermostats, the left one is controlling the left heating plate's temperature