MAJAR VS400RL Installatie-, gebruikers- en onderhoudshandleiding - Pagina 7

Blader online of download pdf Installatie-, gebruikers- en onderhoudshandleiding voor {categorie_naam} MAJAR VS400RL. MAJAR VS400RL 14 pagina's. Sand spreader

Pagina afdrukken
Check the tightening of the bolts at the tightening torque at the end of the manual.
The safety is a challenge that concerns the most while designing and manufacturing this tool.
However, the efforts of the constructor may be shattered due to user carelessness.
The accident prevention depends on prudence and training of staff in charge of using and
maintenance of the machine.
The best safety device is a careful and informed user; we ask you to be this user.
The user of this machine is responsible for the use and safety. The user has to be qualified and trained to the
machine and he also has to know the tractor. Read all the safety instructions.
WARNING
discribed in chapter « daily maintenance ».
This machine is constructed to spread sand. It is not designed to perform other tasks, transport tools or material
that may cause damage on the machine or cause injury. It should not be used to transport persons or material.
DANGER
Never let children or unqualified persons use this machine.
Don't use the machine nearby other persons or objects that may be reached by the lateral
movement of the tool.
Nobody else than the driver can be on the tractor.
Never pass your hand under moving parts, between discs or under the tool.
USE THE MACHINE PREFERABLY ON A DRY GROUND TO AVOID TRACES ON THE
TERRAIN AND OBTAIN GOOD ADHESION OF THE DRIVE WHEEL.
THIS MACHINE IS CONSTRUCTED TO CONTAIN A CERTAIN QUANTITY OF SAND,
DO NOT CHARGE ON THE FRONT CROSSMEMBER, DO NOT TRY TO INCREASE THE LOAD
CAPACITY WHAT WOULD LEAD TO MACHINE BREAKAGE.
ALWAYS DISENGAGE THE ROLLER FOR THE TRANSPORT OUT OF WORKING AREA
MAKE SURE THAT THE SAND DOES NOT CONTAIN STONES BIGGER THAN 3 CM WHAT
WOULD DETERIORAT THE ROLLER. The protection flap is retracted and lets small stones through.

USE

Never use the machine without having carried out all the operations
7