GamerModz xbox One - JUGGERNAUT VER 4.0 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} GamerModz xbox One - JUGGERNAUT VER 4.0. GamerModz xbox One - JUGGERNAUT VER 4.0 10 pagina's.

Pagina afdrukken

Your GamerModz SPS-X3 Controller comes with 5 Programmable Modes - Modes 1 thru 5. To program a Mode,

you must first select the mode (Reference "Toggle Between Rapid Fire Modes" on Page 2).

Once you are in the Mode you wish to Program (Only applies to Modes 1 thru 5) follow the instructions below

to Program that Mode. Your GamerModz SPS-X3 Controller will remember the Re-Programmable Mode settings

even after you turn your controller off.

Programming adjustable Rapid fire modes

Once you are in the Mode you wish to Program, Hold Down the Right Trigger

until the LED begins to flash. Release both the Right Trigger

Hold

Once in Programming Mode you can adjust your shots per second by Tapping Up on D-Pad

Shots per Second and by Tapping Down on the D-Pad

you Tap the D-Pad, your Rate of Fire will Increase or Decrease 1 Shot per Second.

To test the Rapid Fire Rate, fire your weapon by pulling the Right Trigger

Tapping Up

or Down

see graph on Page 4 for Reference.

Once you have the desired Rapid Fire Setting, Tap Right on D-Pad

will flash the number times corresponding to your rate of fire. For Example: 12 Shots per Second, The LED will

flash 12 times.

= Increase Rate of Fire

GamerModz

Adjustable rapid

Fire modes

, then

on the D-Pad until the desired smoothness and rate of fire is achieved. Please

PS4 – SPS-X3 Ver 4.0

and Up on D-Pad

Hold

Until LED

, then

Begins to Flash

to Decrease Shots per Second. Note: Each time

to lock in the rate of fire. The PS4 LED

= Decrease Rate of Fire

, then Hold Up on D-Pad

Release

to Increase

. Adjust your Rapid Fire Rate by

= Lock Rate of Fire