CentralPneumatic 61718 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CentralPneumatic 61718. CentralPneumatic 61718 16 pagina's. 1/2" air

Pagina afdrukken

Air Source

1.
Nev er connect to an air source th at
is capable of ex ceeding 2 0 0 psi.
Over pressurizing the tool may cause
bursting, abnormal operation,
breakage of the tool or serious injury
to persons. Use only clean, dry, regulated
compressed air at the rated pressure or within the
rated pressure range as marked on the tool.
Always verify prior to using the tool that the air
source has been adjusted to the rated air pressure
or within the rated air-pressure range.
Sy m bols and Specif ic Saf ety Instructions
Sy m bol Def initions
Sy m bol
P roperty or statem ent
n
No-load speed
o
. . . / m in
Revolutions or reciprocation per minute
P SI
Pounds per square inch of pressure
f t-lb
Foot-pounds of torque
BP M
Blows per minute
CFM
Cubic Feet per Minute flow
Cubic Feet per Minute flow
SCFM
at standard conditions
Page 4
SAV E THESE INSTR U CTIONS.
For tech nical q uestions, please call 1 -8 8 8 -8 6 6 -5 7 9 7 .
2. Never use oxygen, carbon dioxide, combustible
gases or any bottled gas as an air source
for the tool. Such gases are capable of
explosion and serious injury to persons.
Sy m bol
P roperty or statem ent
NP T
National pipe thread, tapered
NP S
National pipe thread, straight
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved eye protection.
WARNING marking concerning Risk of
Hearing Loss. Wear hearing protection.
WARNING marking concerning
Risk of Respiratory Injury. Wear
NIOSH-approved dust mask/respirator.
WARNING marking concerning
Risk of Explosion.
Item 61718