Centre Point 400110 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Centre Point 400110. Centre Point 400110 17 pagina's. Multi-line laser level

Pagina afdrukken

Using the Tripod

A tripod can be purchased from your

nearest measurement tool dealer. The

below instructions are generic only and

set-up methods may vary between models.

Refer to the documentation from the

tripod manufacturer for details.

Extend the tripod legs to the required height

•

and ensure the legs are spread wide enough

so that the tripod platform is stable. Secure the

legs in place (refer to the documentation from

the tripod manufacturer for details).

Place the laser level onto the tripod and mount

•

via the male thread (5/8" or 1/4") into the base

until firm. Do not over tighten as this may

cause damage to the laser level or tripod.

Care & Maintenance

1. This is a precision measuring tool and

should always be handled with care and

transported within the carry pouch provided.

2. Always turn the tool off when transporting

the laser level or moving around the job site.

3. Whenever possible, store the tool in a dry,

shady location.

4. When the tool is not in use or is being

stored, it is highly recommended to

remove the batteries.

NOT INCLUDED

NOTE: adjustment methods will vary on

tripod models. Always ensure that any locking

levers are unlocked before making adjustments

and returned to the locked position when the

adjustment is complete.

If using an elevating tripod with a measuring

scale on the centre column, the height can be

adjusted as required.

5. Calibration of the tool is recommended every

6. The operator should check the accuracy

7. Clean the tool with a dry, soft cloth after use in

8. Smudges and fingerprints may be removed

WARNING! Attaching the laser to

a tripod without the correct thread

size may cause damage.

six months, if ongoing accurate levelling is

required, or an impact has occurred.

of the tool before precision levelling is

attempted. Failure to do so may result

in inaccurate measurements.

dusty, damp or wet conditions before storing.

with a damp tissue or a soft, lint-free cloth.