Bristan Descent DSC BAS C Handleiding voor installatie-instructies - Pagina 10
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Bristan Descent DSC BAS C. Bristan Descent DSC BAS C 16 pagina's. Tap
Ook voor Bristan Descent DSC BAS C: Installatie-instructies en gebruikershandleiding (16 pagina's)
Pagina afdrukken
Installation Cont.
Bath Filler and Bath Shower Mixer
1. Fit the tap body to the bath ensuring
that the washers are fitted between the
body and the bath to create a water tight
seal.
2. Secure the body to the bath using the
washers and metal backnut. Tighten
the backnuts onto the threaded tails. A
suitable spanner may be required to fully
tighten the backnuts.
3. Connect the hot and cold water
supplies to the threaded tails using
a ¾" BSP connector (not supplied).
4. Bath Shower Mixer only - fit the shower
hose to the hose outlet using the small
sealing washer, and the handset to the
hose using the small washer.
Important
: Prior to the drilling into
walls, check there no hidden electrical
wires, cables or water supply pipes with
the aid of an electronic detector.
If you use power tools do not forget to:
• Wear eye protection
• Unplug equipment after use
Fit the wall bracket (not shown) to the wall
using the fixings supplied, ensuring the
handset and hose reaches it.
5. Turn on both water supplies and turn
both handles to the on position, letting the
water flow for a few minutes.
6. Check all joins and connections for any
leaks.
7. To switch from bath to shower mode,
pull the diverter knob up and turn, to
revert back to bath filling mode push the
diverter knob back down.
10
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.