Bristan EF KIT PK Installatie-instructies en gebruikershandleiding - Pagina 2

Blader online of download pdf Installatie-instructies en gebruikershandleiding voor {categorie_naam} Bristan EF KIT PK. Bristan EF KIT PK 2 pagina's.

Pagina afdrukken
General Cleaning
Bristan products are made from premium materials, with hand polishing and
electroplated finishes.
Your taps or shower should be regularly cleaned with warm water, a mild
pH-neutral liquid soap, and polished with a soft cloth. Any residues from soap,
toothpaste, shampoos and shower gels can cause blemishes if not rinsed off
straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage the
surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges, steel
wool or anything similar.
Some surfaces such as nickel and pewter may be affected by the dye found in
some cloths, so it is also important to avoid hanging cloths on spouts.
Alternative Installation
1
2
Check the Pack Contents
of your EasyFit Tap for
the Reinforcing Plate and
Washer (if required).
4
5
Feed the Reinforcing Plate,
& Washer (if required) and
Turn the hexagonal key
clockwise to secure the
Backnut up to the
EasyFit Base.
underside of the sink.
Notes
Please use this space for any notes you or your installer may have
regarding the installation/plumbing of this product.
Love Your Chrome
Bristan offers an effective
chrome-friendly cleaning kit for
use with your taps and showers.
Scan the QR Code or
search for 'CLEAN KIT01'
on www.bristan.com.
3
Turn the hexagonal
key anti-clockwise
to remove the
backnut from
the EasyFit Base.
Feed the base
through the sink
hole from the top.
6.0
mm
6
4
Proceed to Step 4 of
6.0
the Installation Steps.
mm
Maintenance - Changing Tap
2
2
1
Unscrew the grub
screws using the
Isolate the
tool provided.
water
supply.
5
4
Secure with
grub screws
using the tool
provided.

Troubleshooting

Symptom
Cause(s)
Partially closed isolation valve.
Instantaneous water heater cycles on and off as flow
rate or pressure is too low.
Head of water is below the minimum distance re-
quired.
No flow or low
Hot or cold water being drawn off elsewhere causing
flow rate
pressure changes or instantaneous boiler temperature
changes.
Airlock or partial blockage in the supply pipework or
hoses.
Water supply failure
This is normal for a short time after using the taps.
Water
dripping from
If water continues to drip,
taps
possibly due to the ceramic disc valves/cartridge
Closed isolation valve.
Taps do not
turn on
Mains water supply turned off.
Grub screws are not tight enough at the base
Wobbly Tap
Extra security may be required depending on the
surface the tap is fitted to.
At Bristan, we want to make things as easy as possible for our customers. That's why we offer solid guarantees on
all our products, effective from the date of purchase, to give you peace of mind.
To start your free guarantee simply scan the QR code and register your product.
Alternatively visit www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where our expert team of advisors
will be able to offer you any help and advice.
For full guarantee terms and conditions visit www.bristan.com/guarantees.
3
Remove
your current
tap and
replace with
the desired
Fancy a Change?
Turn on the
mains water
supply, letting the
water flow for a
few minutes to
flush through the
system.
Scan the QR Code or search for
'EasyFit' on www.bristan.com
to see taps compatible with
your base.
Remedy
Open isolation valve.
Increase water flow rate or
pressure through system.
Refer to your Tap Instructions for
Pressure Specifications.
Do not use other water outlets when using the
taps.
Flush through pipework to ensure removal of
debris and any airlocks.
Investigate water supply. Check your plumbing
and heating systems for any faults.
This is caused by capillary action, the build up of
water in the tap body.
Refer to your Tap Instructions for Maintenance
instructions or visit www.youtube.com/BristanTV
to watch the procedure.
Open isolation valve.
Turn on mains water supply.
Ensure the grub screws are fully tightened against
the base
Refer to the Alternative Installation steps in order
to fit the Reinforcing Plate.
tap.