Bristan IRBS1-CP Installatie-instructies en gebruikershandleiding - Pagina 4
Blader online of download pdf Installatie-instructies en gebruikershandleiding voor {categorie_naam} Bristan IRBS1-CP. Bristan IRBS1-CP 20 pagina's. Infrared automatic basin spouts
Pagina afdrukken
Specification
Power Supply Box Inlet Connection: G1/2".
Power Supply Box Outlet Connection:
G1/2"
Operating Pressure Range: Min. 1.0 Bar -
Max. 5.0 Bar
Maximum Static Pressure: 10 Bar
Inlet Water Supply Temperature Range:
5°C - 45°C
Power Supply: AC: 220V-240V; 50/60H
DC: 6V (4 x AA alkaline batteries - Not
Supplied)
Power Consumption: Static <0.3MW
Active: <3W
Sensing Range: 23-26cm
Self-close Override Time: 55 seconds ± 5
seconds
Recommended Usage
Domestic
Light
Commercial
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
4
Heavy
Commercial
Health Care
This product has been tested to meet the
requirements of the Water Regulations
Advisory Scheme (WRAS) and satisfies
the requirements of the Water Supply
(Water Fittings) Regulations 1999 and
current byelaws.
BS 6700 recommends the temperature
of stored water should never exceed
65°C. A stored water temperature of
60°C is considered sufficient to meet all
normal requirements and will minimise
the build up of limescale in hard water
areas.
This product should be installed in
compliance with the current Water
Regulations.
If in doubt, contact a registered plumber
or your Local Water Authority or the
Secretary of The Institute of Plumbing,
address as follows;-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex, RM12 6NB
Tel:01708 472791