Bristan IRBS4-CP Installatie-instructies en gebruikershandleiding - Pagina 9
Blader online of download pdf Installatie-instructies en gebruikershandleiding voor {categorie_naam} Bristan IRBS4-CP. Bristan IRBS4-CP 16 pagina's. Infrared temperature control automatic basin spout
Ook voor Bristan IRBS4-CP: Installatie-instructies en gebruikershandleiding (20 pagina's)
Pagina afdrukken
Installation - Electrical Connections
Inserting Batteries
Your infrared spout is supplied with a
back up battery pack. In the event of a
power failure the batteries will override
the mains power supply to ensure the
spout continues to function.
1. Insert Batteries
Insert 4 x AA batteries into the battery
box ensuring they are inserted the
correct way.
Note: Only use 1.5V AA (LR6) Alkaline
batteries (preferably => 2000mAh for
good battery life).
Installation - Water Connections
Flexible Tails
Care must be taken when connecting the flexible connection hose
from the power supply box to the spout to ensure it does not bend
sharply and kink or twist. See below for recommended ways to fit
the flexible tails.
Slight
90 °
bend
angle
Before connecting the water
supplies to the spout, flush
through the pipework to
ensure removal of debris.
Turn off the mains water supply and
close any isolating valves. Screw the
flexible tails into the bottom of the
spout, ensuring it is tightened fully by
hand only.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Curved
Kinks
round
Connect the flexible tails to the hot and
cold water supplies. Turn on the mains
water supply letting the water flow
for a few minutes. Check all joints and
connections for any leaks.
IMPORTANT
Twists
Failure to follow
these guidelines
may result in poor
performance and
damage to the
flexible tails.
9