Majestic RSW 401 Snelstarthandleiding - Pagina 9

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Majestic RSW 401. Majestic RSW 401 12 pagina's.

Pagina afdrukken

INSTALLATION

Plug the AC/DC adaptor to an AC household outlet, and then plug the DC jack to the back of the unit. Your clock radio is

ready to work for you.

BACKUP BATTERY INSTALLATION

1. Place your unit face down on a flat surface.

2. Slide and remove the battery cover at the bottom of your unit.

3. Insert one CR2032 lithium battery into the battery compartment with the "+" side facing up as indicated.

4. Replace the battery cover.

If AC power is interrupted, the LED display will go off and both the radio and the alarm will not function. The backup battery

will keep the time and all settings of your unit. Make sure a fresh CR2032 lithium battery is used. A fresh CR2032 battery

could backup your clock continuously for around 3 days.

SETTING TIME, 12/24HR TIME AND THE SNOOZE DURATION

1. Press SET once, the hour digits flash. Press

2. Press SET again, the minute digits flash. Press

3. Press SET again, the display shows "24Hr" and flashes, Press

4. Press SET again, the display shows "05" and flashes, Press

If no button will be pressed within 10 seconds, the unit will will exit the setting mode.

Note: when 12-hour time format is selected, the P (PM) icon will appear on the lower middle time display to indicate the

afternoon time; there is no AM indicator.

SETTING THE ALARMS

Press AL 1.2 once, the A1 icon and the hour digits flash. Press

Press AL 1.2 again to adjust minutes. Press

Press AL 1.2 again, LED displays "OFF" (alarm off). To select wake to sound sources, press

rd = wake-by-radio

bu = wake-by-buzzer

OFF = alarm off

Press AL 1.2 again, the A2 icon and the hour digits flash. Press

to set alarm 2.

Press AL1.2 again or no button around 10 seconds to exit alarm setting mode. When wake-to-radio or wake-to-

buzzer is selected, the related alarm is turned on, indicated by appearance of the A1 and / or the A2 icon on the left

side of the display.

STOPPING AND RESETTING THE ALARM TO COME ON THE NEXT DAY

When alarm 1 or 2 is sounding, the related A1 or A2 icon flashes. Press the AL 1.2 once to stop the alarm and reset it to

come on the following day.

Note: When alarm is sounding, press the

alarm for the day.

SNOOZE OPERATION (default snooze duration is 5 minutes)

When alarm is sounding, presses

Note: if your second alarm activates while the first alarm is sounding or it is in the snooze mode, the second alarm

overrides the first alarm (the first alarm is reset to come on the next day).

USING THE HI-LO DIMMER

Press

to adjust the brightness of the LED display.

USING THE NAP TIMER

/ NAP once, the display shows the nap icon and the default naptime "05" (5 minutes).

1. Press

2. Press

/ NAP again to select your desired naptime (5-15-30-45-60-75-90 minutes). It will exit to time display if no

button pressed for 5 seconds.

3. The nap icon lights up when the nap timer is counting. When the nap timer reaches 0, the alarm will sound and the nap

icon will flash. Press

/ NAP once to stop the nap alarm , the nap icon will go off.

Note: if the nap time is set up then your alarm is sounding, your nap time will be cancelled automatically.

SETTING UP THE FM ANTENNA

Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or attach to other

antennas.

to set the current hour (hold to advance rapidly).

to set minutes.

to set the alarm 1 minutes.

/ NAP or RADIO / SLEEP will activate the nap timer or the radio and stop the

once, the alarm will be silenced and come on again after the set snooze duration.

P.2

to select "12Hr" or "24Hr" time format.

to select your snooze time from 5 to 60 minutes.

to set the alarm 1 hour.

to set the alarm 2 hour. Repeat step 2) and 3)

to select :-