Bristan K SNKSL EF C Handleiding voor installatie-instructies - Pagina 7

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Bristan K SNKSL EF C. Bristan K SNKSL EF C 16 pagina's. Colonial single lever easyfit sink mixer

Pagina afdrukken

Installation

1. Fit push-fit connector

Place the 'push-fit connector' into the hole in the

basin top. Ensure the rubber washer is fitted to

the underside.

2. Attach hot and cold connectors

Position the backnut under the basin (with the

rubber seal on top), ensuring the locating pin fits

into the hole in the backnut. Insert and loosely

tighten the threaded cold connector by turning the

6mm hexagonal key clockwise.

Once threading has started you can let go of the

backnut. Before fully tightening the cold

connector, place the 'hot connector' into the

push-fit connector - ensure it fits fully through the

basin hole.

Note: The hot connector has 2 flat edges at the top

to allow it to fit fully down and close to the top of

the cold connector. Failure to do this may prevent

the tap fitting onto the connector.

Important: The push-fit connector must be

fully tightened to the back nut before attaching the

flexible connecting pipes.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

6mm

hexagonal

key

Hot

connector

Rubber

washer

Under

the

basin

Cold

connector

Locating

Backnut with

rubber seal