Majestic Oslo Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Majestic Oslo. Majestic Oslo 8 pagina's. Freestanding panel

The floor profile is supplied over-length; mark it to the width of the

glass with a strip of masking tape. Cut it to length, then file smooth.

Support Arm Boss Allen Bolt

Disassemble the support arms.

When measuring the arms the length is represented by X

( X ) mm

Grub Screw

Xmm

Floor or Tray

The Majestic Shower Company Limited

17 Flitch Industrial Estate, Chelmsford Road,

Dunmow, CM6 1XJ

Place the profile on the floor or tray, and mark its position using

masking tape.

Run a 3mm bead of silicone along the underside of the floor

profile, and carefully replace into the marked position; secure it

with masking tape.

Check that the supporting wall is square; make a note if it is

leaning by more than + or – 10mm at the approximate height

of the glass. Measure from the inside of the floor profile to the

supporting wall (Xmm), and minus 20mm from the figure; then

cut the support arm to the calculated length.

A: If the wall leans in at the top by more than 10mm, cut that

amount extra off the support arm.

B: if the wall leans out at the top by more than 10mm, leave

the amount extra on the length of the arm.

Telephone + 44 (0) 8448 001 500

Facsimile + 44 (0) 1279 635 074

[email protected] www.majesticshowers.com