Majestic Portofino Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Majestic Portofino. Majestic Portofino 14 pagina's. 17- or 24-mm surface wall profiles
Ook voor Majestic Portofino: Installatiehandleiding (14 pagina's)

Pagina afdrukken

Measure the length of the outside of the horizontal return profile

Xmm, and make a mark at this point on the opposite wall. Place

the outside of the horizontal inline profile inside the mark,

perpendicular to the wall. Ensure the mitred end is pushed into

the corner, tape the profile into place and mark its position.

Double check that the out side of the in-line profile

aligns with the end of the glass return panel.

Reposition the vertical wall profile, and insert the top and

bottom screws to hold it place. Insert a rubber strip into the

horizontal inline profile. Using the suction glass lifters, lift the

glass inline panel into the profile.

Make sure the glass inline panel is plumb vertical and level with

the return panel; pack it up with 3" rubber strips if necessary,

taking note of their positions. Do not use more than three strips

of rubber under the panel.

The Majestic Shower Company Limited

One North Place, Edinburgh Way, Harlow Essex

CM20 2SL England,

Insert the 10mm spacer into the horizontal inline profile, and use

it to align the second vertical wall profile. Push the mitred ends

together, and use a spirit level to ensure the wall profile is plumb

vertical.

Mark the screw holes; remove the vertical wall profile. Drill

4.5mm holes; insert Rawl plugs.

Disassemble the remaining two glass-to-wall brackets, being

careful not to damage the faceplates. With the clear plastic gaskets

inserted and wall screw plates facing inwards, align the brackets

centrally to the holes in the glass return panel; hold them in place

and mark the screw holes.

Telephone + 44 (0) 8448 001 500

Facsimile + 44 (0) 1279 635 074

[email protected] www.majesticshowers.com