DecaLED Orpheus 85000013 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} DecaLED Orpheus 85000013. DecaLED Orpheus 85000013 2 pagina's.

Pagina afdrukken
Installatie
•
Respecteer altijd de veiligheidsinstructies! Neem deze door voordat u met de
installatie begint.
I
I
2
1
I
a
1
4
Motion Sensor
Daylight Sensor
b
b
2
1
c
c
c
2
2.1
2.2
c
2.2
c
c
2.1
2.4
c
2.3
Algemeen gebruik
De DecaLED
Orpheus LED bureaulamp is een energiezuinig, dimbaar LED armatuur
®
met instelbare kleurtemperatuur en sensoren voor beweging en daglicht. Dankzij
de lage verblindingsfactor is dit armatuur ideaal als werklicht in kantoren en bij
beeldschermwerkplekken.
•
Bescherm dit product tegen extreme temperaturen.
•
Bescherm het product tegen schokken. Vermijd brute kracht tijdens de bediening.
•
Bestudeer eerst de functies van het product voordat u het gaat gebruiken.
•
Om veiligheidsredenen mag u geen wijzigingen aanbrengen aan het product.
Schade door wijzigingen die de gebruiker heeft aangebracht aan het product, valt
niet onder de garantie.
•
Gebruik het product enkel waarvoor het gemaakt is. Andere toepassingen kunnen
leiden tot kortsluitingen, brandwonden, elektrische schokken, enz.
•
De garantie vervalt automatisch bij ongeoorloofd gebruik.
•
De garantie geldt niet voor schade door het negeren van bepaalde richtlijnen in
deze handleiding. Uw dealer zal de verantwoordelijkheid afwijzen voor defecten of
problemen die hier rechtstreeks verband mee houden.
•
Gebruik de oorspronkelijke verpakking wanneer u het product vervoert.
•
Bewaar deze handleiding voor verdere raadpleging.
Afvoeren van het product (WEEE)
Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn
levenscyclus wordt weggeworpen, dit toestel schade kan toebrengen aan
het milieu. Gooi dit toestel (en eventuele batterijen) niet bij het gewone
huishoudelijke afval; het moet bij een gespecialiseerd bedrijf terechtkomen voor
recyclage. U moet dit toestel naar uw verdeler of naar een lokaal recyclagepunt
brengen. Respecteer de plaatselijke milieuwetgeving.
A.Motion Sensor
I
I
2
3
1. turn on the lamp
B.Daylight Sensor
a
a2
1
1.Turn on the light and dimming to a comfortable brightness, the daylight sensor will memory this lux value which performance on desk
as a standard lux.
&
2.When ambient brightness increase (reduce), light will adjust to reduce (increase) its brightness, and guarantee the lux on desk are
same to that standard lux, or at least close to that standard lux, it may have around 10% torlerance.
3.When every time dimming again on light brightness, daylight sensor will memory this new lux value which performance on desk as
a new standard lux.
c
b
Attention: The lux value which the light performance on desk will be effected if there is any change on desk within the area of 20° angle
2
1
under the daylight sensor.
Detectable area
30min
30min
c
c
c
c
2.3
2.1
2.4
2.2
1 (a)
Installation
Clip
2 (b)
3 (c)
•
Always respect the safety instructions! Check them out before you begin the
installation.
30min
I
4
I
3
2. The lamp brightness reduce to
30% when there is no presence
in 30min
a2
b
1
c
c
1
2
≤85°
c
2.2
c
2.4
c
2.3
≤3500 mm
General usage
The DecaLED® Orpheus LED desk lamp is an energy-efficient, dimmable LED fixture with
adjustable color temperature and sensors for movement and daylight. Thanks to the low
glare factor, this luminaire is ideal as work light in offices and at VDU workstations.
•
Keep this device away from extreme temperatures.
•
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. All other uses may lead to short circuits,
burns, electroshocks, lamp explosion, crash, etc.
•
Using the device in an unauthorised way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
Disposal of the product (WEEE)
This symbol on the device or the package indicates that disposal of the
device after its lifecycle could harm the environment. Do not dispose of
the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
1 (a)
Clip
2 (b)
3 (c)
30min
a
I
1
4
3. After another 30min, the lamp
switches off automatically when
still no presence detected
b
b
2
1
c
c
2
2.1
Configuratie | Configuration
Here to tell you how to play
c
2.2
c
2.1
c
2.3
c
2.4
Dip
3
swithes
1
Adjust the dip switch to the module by screwdriver.
Shot press to turn on/off the indirect light.
Long press to dimming.
On-Off Switch:
1. ON: Turn on and will keep light same as previous status automatically.
2.OFF: Turn off the light.
Long press for CCT change (only for color dimming)
Shot press to turn on/off the direct light.
Long press to dimming.
non color dimming
color dimming
Motion Sensor
&
Daylight Sensor
A.Motion Sensor
30min
1. turn on the lamp
2. The lamp brightness reduce to
30% when there is no presence
in 30min
B.Daylight Sensor
1.Turn on the light and dimming to a comfortable brightness, the daylight sensor will memory this lux value which performance on desk
as a standard lux.
2.When ambient brightness increase (reduce), light will adjust to reduce (increase) its brightness, and guarantee the lux on desk are
same to that standard lux, or at least close to that standard lux, it may have around 10% torlerance.
3.When every time dimming again on light brightness, daylight sensor will memory this new lux value which performance on desk as
a new standard lux.
Attention: The lux value which the light performance on desk will be effected if there is any change on desk within the area of 20° angle
under the daylight sensor.
Detectable area
≤85°
≤3500 mm
4.The lamp will switches on
automatically at once when there
is presence detected.
c
2.2
Motion Sensor & Daylight Sensor
c
c
2.1
2.4
c
2.3
information
Motion
Daylight
sensor
sensor
0
OFF
OFF
1
ON
OFF
2
ON
ON
3
OFF
ON
Manual
30min
3. After another 30min, the lamp
4.The lamp will switches on
switches off automatically when
automatically at once when there
still no presence detected
is presence detected.
Here to tell you how to play
Motion Sensor & Daylight Sensor
information
Motion
Daylight
Dip
sensor
sensor
3
swithes
0
OFF
OFF
1
OFF
ON
1
2
ON
ON
3
OFF
ON
Adjust the dip switch to the module by screwdriver.
a
a2
1
c
b
1
2
c
2.3
c
2