Bristan CAS BAS C Handleiding voor installatie-instructies - Pagina 13

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Bristan CAS BAS C. Bristan CAS BAS C 20 pagina's. Casino tap range

Pagina afdrukken

Installation Cont.

3 Hole Basin Mixer and Bath Filler

1. Remove the shroud from the threaded

tail.

2. Fit the side bodies to the

basin and secure in place by screwing

the locking nut on to the threaded tails

and tighten the backnuts under the basin.

Replace the shroud and the handle,

tighten the grub screw.

3. Unscrew the T-Joint assembly and

remove washers and backnut from the

thread of the spout and fit the spout to the

basin tightening the backnut .

4. Re-attach the T-joint assembly and

connect to the side bodies (hot on the left,

cold on the right when viewed from the

front), by using the flexi tails supplied.

5. Connect the hot and cold water

supplies to the side bodies (hot to the left,

cold on the right hand side), fully open

both valves, letting them run for a few

minutes to flush the system.

6. Fit the clicker waste (basin mixer only)

ensuring a rubber washer is fitted

between the basin and the waste.

Place the other rubber washer

under the basin and secure in place by

tightening the backnut. In order to fill the

basin, the button in the middle of the

waste needs to be pressed down.

To release the water, press the button

again.

7. Check all joints and connections

for leaks.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.