Bristan Claret CLR 1HBF C/WHT Installatie-instructies en gebruikershandleiding - Pagina 3
Blader online of download pdf Installatie-instructies en gebruikershandleiding voor {categorie_naam} Bristan Claret CLR 1HBF C/WHT. Bristan Claret CLR 1HBF C/WHT 16 pagina's.
Pagina afdrukken
Important Safety Information
• Please read these instructions thoroughly
and retain for future use.
• All products manufactured and supplied
by Bristan are safe provided they are installed,
used correctly and receive regular maintenance
in accordance with these instructions.
• If you are in any doubt about your ability
to install this product safely you must employ
the services of an experienced qualified
plumber/electrically qualified person.
•
This product has been tested to the Water
Regulations Advisory Scheme (WRAS) and
satisfies the requirements of the Water Supply
(Water Fittings) Regulations 1999 and current
bylaws. For full Installation Requirements &
Notes (IRN) please visit wras.co.uk/directory.
Warning: Before starting
•
any installation please consider the
following: before drilling into walls, check that
there are no hidden electrical wires, cables or
water supply pipes. This can be checked with
the aid of an electronic detector.
• If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
• Important: Remember to turn off the mains
water supply before connecting to any existing
pipe work.
Warning: Before installing
•
the new fitting it is essential that
you thoroughly flush through the pipework in
order to remove any remaining swarf, solder,
etc. Failure to carry out this procedure could
cause problems or damage to the workings of
the fitting.
•
We recommend isolation valves to be fitted to
the inlet water supplies to ensure ease of future
maintenance.
•
Full access must be made available for future
maintenance/servicing purposes.
• Take care when handling the 'flexible
connecting pipes', do not bend, twist or crush
them. Only tighten the pipes by hand.
• Do not crush or kink the shower hose, this
could damage the hose and cause leaks.
This product must not be modified in any way as
this will invalidate the guarantee.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
If in doubt, contact a registered plumber or your
Local Water Authority or the Secretary of the
Institute of Plumbing, address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: 01708 472791
3